Aquaflex Floor acrylic polyurethane

Aquaflex Floor acrylic polyurethane

Aquaflex paint for concrete floors Aquaflex Floor acrylic polyurethane in water-based shades.

Abrasion resistant coating for painted concrete floors.

Aquaflex Floor acrylic polyurethane www.denber-paints.co.il

Aquaflex Floor acrylic polyurethane www.denber-paints.co.il

Characteristics:

  • Ability to penetrate exposed concrete to obtain adhesion and prevent peeling.
  • Seals and repels water, oil, dirt and prevents their penetration into the infrastructure.
    • Strong resistance to alkaline substances.
    • Abrasion resistance in concrete floors.’
    • Suitable for UV resistant interior and exterior painting
    • In a variety of shades from every catalog
    • In three gloss levels: glossy, matte, silky

Uses:

  • Painting concrete floors in halls.
  • For painting concrete paths.
  • Coloring interlocking stones.
  • For painting concrete parking surfaces.
  • Painting concrete stairs.
  • For painting concrete curbs.
  • Painting concrete columns.
  • for painting dance floors.
  • New concrete should be painted only after 28 days of curing.

Abrasion resistant coating for painted concrete floors.

Technical data:

  • Theoretical coverage area per layer – 1 liter per 12-15 square meters.
  • Recommended number of layers – 2
  • Consumption for concrete – 1 liter per 6-8 square meters in two layers.
  • Flexibility – 1 mm (Sheen)
  • Density – 1.0 gm/cm 3
  • Viscosity – 30-40 cPs (Brookfield)
  • Stiffness – 5 <Dg (Erichsen

Containing:

  • Acrylic polyurethane emulsion.
  • pigments.
  • water.
  • additives.

Color:

  • In every shade from every catalog.

Gloss:

  • Glossy, matte, silky

Touch drying:

  • 2 hours to 4 hours .

Drying between layers:

  • 6 hours. Final : 12 hours  for treading : 24-72 hours depending on the ambient temperature.

Beginning of water repellency:

  • 12 hours. Final repellency after 3 days.

Abrasion resistant coating for painted concrete floors.

Application methods:

  • Spraying, rolling, brushing. in a uniform thin layer without puddles.
  • When spraying, spray until completely wet.

Dilution:

  • water if necessary.
  • Water can be added to spray the first layer for deeper penetration.

Area preparation and application:

  • Recommended: polishing and roughing and vacuuming as much as possible.
  • Less recommended: cleaning with high water pressure, at least 150 at.
  • Waiting for complete drying and performing epoxy putty repairs if necessary.
  • You can burn with hydrochloric acid at full concentration and wash with water to create a roughness that improves the adhesion of the paint to the concrete. Must be washed well without acid residues which will cause the paint to peel.
  • Applying a first layer diluted 30% for penetration into concrete.
  • After 6-24 hours apply a second layer without thinning.

Packing:

  • 5 liters, 18 liters.

Storage:

  • In a cool and shady place at room temperature.
  • Make sure lids are tightly closed.

Shelf Life:

  • 12 months in original packaging.

Cleaning tools:

  • water immediately after application.

Abrasion resistant coating for painted concrete floors.

Safety:

  • Not for food, keep out of reach of children.
  • In case of injury, seek medical attention.

Warning:

  • Do not mix with materials not recommended by us. also
  • It is recommended not to apply on a rainy day. also

Quality Inspection:

  • In the laboratories of our factory according to the specification. also
  • ISO 9001-2015 also
Paint for concrete floors Aquaflex Fluor acrylic polyurethane www.denber.net
Aquaflex paint for concrete floors Aquaflex fluor acrylic polyurethane www.denber.net

For the full specification :  paint for concrete floors Aquaflex Floor

  

  

Abrasion resistant coating for painted concrete floors.