Topcoat Electrostatic Epoxy paint

Topcoat Electrostatic Epoxy paint

Liquid epoxy paint is electrically charged for electrostatic painting and slow drying in air – or quick drying in an oven at 180 degrees for 30 minutes.

Two-component electrostatic for metal, aluminum for a continuous production line in many glossy/matte/silky RAL shades

Decorative electrostatic epoxy top paint, free of lead and chromates for painting steels, aluminum and aluminum alloys. 

EPOXYDEN FOR ELECTROSTATIC TOP COAT RAL COLORS TWO COMPONENT FOR METAL PARTS AND ALUMINUM. FOR AIR DRY OR STOVING.

The paint creates a strong protective layer with high adhesion to an epoxy base paint, suitable for aerospace parts made of aluminum alloys that have undergone appropriate surface preparation according to the American standard in all its stages. Also used as a decorative protective top for steels, metal parts, metal accessories and more…

Characteristics:

• Electrostatic paint for frontal spraying of formal elements and for receiving an enveloping color coating from all sides.
• Decorative top paint with mechanical strength and high adhesion to an epoxy base.
• Creates a proper protection for the painted part for durability in unusual conditions.
• Perfect top for painting metal parts such as steel, aluminum and aviation aluminum alloys.
• Protects against oxidation or rust in Brazilian metals.
• Resistant to alkaline solutions and mixed acids and abnormal humidity conditions.
• powerful
• Easy to apply and repaint and dries slowly in air or quickly in the oven
• Resistant to polluted industrial water.
• Resistant to fuels and oils including jet fuel
• and resistant to detergents.
• and resistant to scratches and blows.
• Suitable for painting industrial and aviation elements.
• Suitable for painting bicycle frames and others in an automatic continuous marking line.
• And suitable for spraying with a paint turbine, airless and spray gun.
• Coat the painted part with a thin and uniform and decorative layer in shades.
• Mechanical strength and excellent abrasion resistance.
• Resistant to momentary heat up to 200 degrees and more prolonged heat up to 150 degrees.
• High coverage area.

Liquid epoxy paint is electrically charged for electrostatic painting and slow drying in air – or quick drying in an oven at 180 degrees for 30 minutes.

Uses:

• For painting formal metal items (bicycle frame for example) in an automatic electrostatic production and painting line.
• As a top for various metal parts in industry and for aviation in the fields of aviation and space.

Technical data:

• Coverage – 1 liter per 10-15 square meters in a layer of 50 dry microns minimum.
• Flexibility – 1 mm (sheen)
• Density – part A 1.2-1.45 gm/cm ³  , part B 0.85-0.95 gm/cm ³  (1475 (ASTM D
• Viscosity – part A about 70 kerbs part 2 about 25 kerbs (10% + )
• Stiffness – >10 Dg (Ericsson)
• Flash point: Part A – 27 degrees Celsius, Part B – 166 degrees.
• Amount of solids – part A by weight 68%, part B by volume 52% (ASTM-D-2369)
• Abrasion – 120 microns – 2560 cycles (Gardner) ASTM
• Recommended layer thickness – 75-100 wet microns. 50 microns dry (minimum values)
• Recommended number of layers – 2 -1
• Hard drying time – in an oven at 180 degrees for 30 minutes, in air up to 24 hours.
• Foot Life – 4 hours

Color:

• All RAL shades.

 Packing:

• 3.6+1.4=5 liters, 13+3=18 liters. and

This technical specification is for  non-binding general information only. and

Produced by Denver Paints and Coatings Israel Ltd. , and