Epoxyden metallic electrostatic paint

Epoxyden metallic electrostatic paint

Metallic electrostatic epoxy for baking in the oven or air drying

Electrostatic epoxy for baking in a metal oven www.denber.net

Metallic top epoxy, two-component electrostatic for metal, aluminum for a continuous production line.

EPOXYDEN ELECTROSTATIC TOP COAT METALLIC TWO COMPONENT FOR METAL PARTS AND ALUMINUM. FOR STOVING OR AIR DRY.

Metallic colored top for painting on an electrostatic epoxy base, extra strong. Air dry or oven 180 degrees for 30 minutes. The paint creates a strong protective layer with high adhesion to an epoxy base paint, suitable for aerospace parts made of aluminum alloys that have undergone appropriate surface preparation according to the American standard in all its stages. Also used as a decorative protective top for steels, metal parts, metal accessories and more…

Epoxyden metallic electrostatic paint. www.denber-paints.co.il

Characteristics:

Electrostatic paint for frontal spraying of formal elements and for receiving an enveloping color coating from all sides.
Decorative metallic top paint with mechanical strength and high adhesion to an epoxy base.
Creates a proper protection for the painted part for durability in unusual conditions.
Resistant to alkaline solutions and mixed acids and abnormal humidity conditions.
powerful
Easy to apply and repaint and dries quickly in an oven at 180 degrees for 30 minutes.
Resistant to polluted industrial water.
Resistant to fuels and oils including jet fuel
and resistant to detergents.
and resistant to scratches and blows.
Suitable for painting industrial and aviation elements.
Suitable for painting bicycle frames and others in an automatic continuous marking line.
And suitable for spraying with a paint turbine, airless and spray gun.
Coat the painted part with a thin and uniform and decorative layer in shades.
Mechanical strength and excellent abrasion resistance.
Resistant to momentary heat up to 200 degrees and more prolonged heat up to 150 degrees.
High coverage area.

Metallic top epoxy, two-component electrostatic for metal, aluminum for a continuous production line.

uses:

For painting formal metal items (bicycles for example) in an automatic electrostatic production and painting line.
As a top for various metal parts in industry and for aviation in the fields of aviation and space.

Technical data:

Coverage – 1 liter per 10-15 square meters in a layer of 50 dry microns minimum.
Flexibility – 1 mm (sheen)
Density – part A 1.2-1.45 gm/cm ³ , part B 0.85-0.95 gm/cm ³ (1475 (ASTM D
Viscosity – part A about 70 kerbs part 2 about 25 kerbs (10% + )
Stiffness – >10 Dg (Ericsson)
Base to hard ratio: 2.5:1
Flash point: Part A – 27 degrees Celsius, Part B – 166 degrees.
Amount of solids – part A by weight 68%, part B by volume 52% (ASTM-D-2369)
Abrasion – 120 microns – 2560 cycles (Gardner) ASTM
Recommended layer thickness – 75-100 wet microns. 50 microns dry (minimum values)
Recommended number of layers – 2 -1
Hard drying time – in an oven at 180 degrees for 30 minutes, in air up to 24 hours.
Foot Life – 4 hours.
Waiting time after mixing and before starting to paint: 10 minutes and stir again with a mechanical mixer