Epoxyden aqua antistatic black

Epoxyden aqua antistatic black

Antistatic epoxy epoxyden aqua water base electrically conductive.

Water-based black epoxy paint, electrically conductive for antistatic uses.

Epoxyden aqua antistatic black. www.denber-paints.co.il

Epoxyden aqua antistatic black. www.denber-paints.co.il

Characteristics:

  • Very strong and adheres well to any infrastructure.
  • Used as an antistatic paint to ground static electricity to an extension point.
  • Used as a shielding layer to prevent frequency interference.
  • Does not contain any thinners or volatile solvents.
  • Water-based, easy to apply, odorless.
  • Moisture barrier.
  • Very washable and resistant to scrubbing.

Uses:

  • For painting areas for shielding purposes.
  • For grounding static electricity generated by friction.
  • To create electricity or frequency conduction for non-conductive bodies such as plastic.

Technical data:

  • Coverage capacity – 1 liter per 5-10 square meters
  • 1 mm flexibility (Sheen)
  • Density – 1.1-1.3 gm/cm 3
  • Stiffness – 3 Dg < (Ericsson)
  • Abrasion – 120 microns – 940 cycles (Gardner) ASTM
  • Resistance to scrubbing – minimum 200 cycles according to the Israeli standard 1945
  • Base to hardener ratio – 1:1 by volume
  • Recommended layer thickness – 50-70 microns dry, (about 100 microns wet per layer)
  • Recommended number of layers – 1-2
  • Amount of solids – 44-48%
  • For antistatic conduction requirement – 1-100 mega ohms 106-108
  • Conductivity (resistance) – 1-2 kilo ohms for a 10 cm strip with a thickness of 70 microns. (10 3 -20 3  kilo ohm)

Water-based black epoxy paint, electrically conductive for antistatic uses

Containing:

  • Fine epoxy resin.
  • Melanins, pigments.
  • Advanced plasticizers.
  • Advanced fungicides, preservatives.
  • Wetting and leveling agents.
  • Taxotropic and other additives.
  • polyamine hardener.

Color:

  • black.

Gloss:

  • Matt.

Touch drying :

  • 1-2 hours.

Drying between layers:

  • 4 hours. Final: 12-24 hours.

Application methods:

  • Brushing, rolling, spraying. (Thesis in fistula or airless)

Dilution:

  • water.

Area preparation:

  • Thorough cleaning of dust, grease, dirt and loose paint.

Primary color:

  • The color is a basic color.

Packing:

  • 5+5 = 10 liters, 9+9= 18 liters.

Storage:

  • In a cool and shady place at room temperature.
  • Not resistant to freezing (except export model)
  • Make sure lids are tightly closed.

Shelf Life:

  • 12 months in the original packaging.

Cleaning tools:

  • Tap water and soap at the end of painting.

Safety:

  • Not for food, keep out of reach of children. and
  • Ensure adequate ventilation during application. and
  • Wear goggles, gloves, protective clothing. and
  • In case of injury – seek medical attention immediately. and

Warning:

  • Do not apply at a temperature lower than 5+ degrees Celsius. and
  • Do not mix with materials not recommended by us. and
  • Do not apply on a rainy day. and
  • Avoiding contact with the skin and eyes, causes dryness and irritation of the skin. In case of contact, wash with plenty of running water and seek medical attention. and

Quality Inspection:

  • In the laboratories of our factory according to the specification. and
  • ISO 9001-2015 and

This technical specification is for  non-binding general information only. and

Manufactured by Denber Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard