Denbersilver 540 electrical conductive

Denbersilver 540 electrical conductive

Pure silver paint perfectly conducts electricity stands to high temperature up to 540 degrees.

Characteristics:

• Resistant to high heat 540 degrees.
• A perfect conductor of electricity.
• Quick drying top paint.
• Resistant to humid environmental conditions.
• Easy to apply. Dries on its own at ambient temperature.
• Economical – in extremely thin layers. High coverage area.
• Suitable for indoor and outdoor use.
• High adhesion to the infrastructure.

Uses:

• Electrically conductive paint for elements in a particularly hot environment.
• For application in hot electronic systems or in a hot environment.
• For power transmission, command and control in circuits with heat sinks that emit high heat.
• for static electricity grounding.

Technical data:

• Theoretical coverage – 1 liter per 8 square meters on a smooth surface.
• Consumption – 125 microns wet leaving 25 microns dry.
• Flexibility – 3 mm (sheen).
• Density – 1.2-1.3 gm/cm ³  .
• Viscosity – 2,000 cps (Brookfield).
• Stiffness – 3 Dg < (Ericsson).
• Abrasion – 40 microns – 1560 cycles (Gardner) ASTM.
• Heat resistance –  ^O C540 (ASTM D2485-91).
• Recommended layer thickness – 90 dry microns.
• Recommended number of layers – 1-2

Pure silver color perfectly conducts electricity to high heat

Electrical data:

• Surface resistance – 0-6 ohm ASTM F 150-89

 Containing:

• Organic resin and special silicones.
• pure silver
• Special plasticizers.
• Solvents, additives.

Color:

• Silver gold

Gloss:

• silk.

Touch drying :

• 1-2 hours.

Drying between layers:

• 6 hours. Final: 24 hours at room temperature.

Application methods:

• Brushing, rolling, spraying.
• First layer – recommended by spraying pressure 5 atm.
• Second layer – in a roll.

If the paint is not applied uniformly due to too high surface tension of a previous layer, and crystallizes into drops like “mercury”, apply as it is and after 60 seconds reapply until a uniform surface is obtained.

Dilution:

• D-32 thinner.
• Brushing/rolling – 5%
• The splash – 5-10%.
• Airless – 0-5%

Area preparation:

• Thorough cleaning of dust, grease, dirt and loose paint. and
• To renew the top color – light rubbing with glass wool to remove grains and blowing with air pressure. and

Packing:

• 0.5 kg, 1 kg.

Storage:

• In a cool and shady place at room temperature. and
• Make sure lids are tightly closed. and

Shelf Life:

• 12 months in the original packaging. and

Cleaning tools:

• 32-D thinner at the end of painting. and

Safety:

• Not for food, keep out of reach of children. and
• Flammable, away from heat, fire and sparks. and
• Ensure adequate ventilation during application. and
• Wear safety glasses, solvent-resistant gloves, protective clothing. and
• In case of injury – wash with plenty of water and seek medical attention immediately. and

Warning:

• Do not mix with materials not recommended by us. and
• Avoiding contact with the skin and eyes, causes dryness and irritation of the skin. In case of contact, wash with plenty of running water and seek medical attention. and

Quality Inspection:

• In the laboratories of our factory according to the specification. and
• ISO 9001-2015 and

Denber Paints and Coatings Israel Ltd.