Hydro plug gray silica powder for concrete casting

Hydro plug gray silica powder for concrete casting

Abrasive powder for concrete

Hydro plug gray silica powder for concrete casting – strengthens and improves pouring, leaves a smoother and stronger surface and provides upgraded abrasion resistance.

HYDRO PLUG – silica powder for hardening and smoothing top layer of poured concrete

Silica grains are difficult to disperse while sliding the helicopter to insert into the upper shell of the concrete, to obtain a denser and smoother upper epoxy layer with increased wear resistance.

Packing:

  • 10 kg, 25 kg

Storage:

  • In a cool and shady place at room temperature with adequate ventilation.
  • Make sure the lid is tightly closed.

Shelf Life:

  • 12 months in the original packaging.
  • Make sure packages are tightly closed.

Safety:

  • Not for food, keep out of reach of children.
  • Ensure adequate ventilation during application.
  • Wear safety glasses, solvent-resistant gloves, protective clothing.
  • In case of injury – seek medical attention immediately.

Warning:

  • Do not mix with materials not recommended by us.
  • Avoiding contact with the skin and eyes, causes dryness and irritation of the skin. In case of contact, wash with plenty of running water and seek medical attention.

Quality Inspection:

  • In the laboratories of our factory according to the specification
  • ISO 9001-2015

Abrasive powder for concrete

For the attention of the user:

This technical specification is for non-binding general information only. The product is a professional product for professionals only who have already acquired previous experience in its application. Nothing written in this specification is used as a substitute for advice/training by a consultant/authorized guide. It must be applied first on a small area to check suitability before applying to large areas. The content of this specification changes over time and updates are introduced, current versions must be requested. Names of professional consultants/instructors You can get by phone. You must read the  MSDS safety instructions  of the product before starting to work with it.

Manufactured by Denver Paints and Coatings Israel Ltd., PO Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard

www.denber-paints.co.il