Arodor Floor abrasive grains

Arodor Floor abrasive grains

Abrasive grains additive for smoothed floors in industrial floors while pouring.

A mixture of quartz and corborundum grinding aggregate powders  for helicopter smoothing concrete floors.

Abrasive grains for smoothed floors in industry.

A mixture of grinding grains of natural quartz and black corborundum grains (degree of difficulty after diamond). For spreading while smoothing cast concrete floors and inserting the grains into the upper shell of the concrete. Creates an abrasion resistant floor. Prevents the disintegration of the concrete and removal of dust from the floor due to abrasion from driving tools on the floor.

The corborundum = silicon carbide grains provide more abrasive protection than any quartz for many years.

Technical data:

• Specific gravity – 2.0
• Quantity for spreading – 1-2 kg per square meter
• Shade – red/brown, brown, mustard, gray, and all of them have shiny black dots
• Aggregation state – grains of different sizes to powder
• Sizes – 100 microns and up to 2.5 mm

safety:

• Not for food, keep out of reach of children.
• In case of injury – seek medical attention immediately.
• Be sure to carefully read the safety instructions on the label.

Erodor Floor grinding floor

Abrasive grains for smoothed floors in industry

Warning:

• Do not mix with materials not recommended by us.
• Very heavy material, be careful when lifting large packages of the material.

Quality Inspection:

• in the laboratories of our factory in accordance with specification
• ISO 9001-2015 also

For the attention of the user:

This technical specification is for non-binding general information only. The product is a professional product for professionals only who have already acquired previous experience in its application. Nothing written in this specification is used as a substitute for advice/training by a consultant/authorized guide. It must be applied first on a small area to check suitability before applying to large areas. The content of this specification changes over time and updates are introduced, current versions must be requested. Names of professional consultants/instructors You can get by phone. You must read  the product’s MSDS safety instructions before starting to work with it. also

Manufactured by Denber Paints and Coatings Israel Ltd., PO Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard.

Abrasive grains for smoothed floors in industry