Retarder retards drying

Retarder retards drying

Allows painting large areas without OVER SPRAY

A drying inhibitor additive for paints to prevent overspray.

Additive for fast-drying paints to prevent overspray, prolongs the time the paint begins to dry and causes it to reach the surface wet and not as a dry spray that creates dry dust due to the drying of the paint spray in the air before it reaches the painted surface.

Color:

• Clear

User manual:

• Open carefully and add about 10% of the volume to the paint mixture in the paint gun or petition as needed.

Packing:

• 1 liter. 5 liters.

Storage:

• In a cool and shady place at room temperature.

Shelf Life:

• 24 months in the original packaging.

Safety:

• Not for food, keep out of reach of children. and
• Highly flammable away from heat, fire and sparks. and
• Ensure adequate ventilation during application. If there is a lack of oxygen, take care of forced ventilation or masks connected to an oxygen source. (See ventilation data above) f
• Wear safety glasses, solvent-resistant gloves, protective clothing, a mask suitable for filtering dilute vapors. and
• Avoid contact with the skin and eyes which causes irritation and dryness, in case of injury – seek medical attention immediately. and
• Be sure to carefully read and apply the safety instructions, be sure to undergo refresher training with a safety officer/supervisor once a month. and

Retarder retards drying

Allows painting large areas without OVER SPRAY

Warning:

• Do not mix with materials not recommended by us. and
• Avoid contact with skin and eyes, causes dryness and skin irritation. In case of contact, wash with plenty of running water and seek medical attention.

Quality Inspection:

• In the laboratories of our factory according to the specification. and
• ISO 9001-2015 and

For the attention of the user:

This technical specification is for  non-binding general information  only. The product is a professional product for professionals only who have already acquired previous experience in its application. Nothing written in this specification is used as a substitute for advice/training by a consultant/authorized guide . It must first be applied to a small area to check suitability before applying to large areas. The content of this specification changes over time and updates are introduced, current versions must be requested. Names of professional consultants/instructors You can get by phone. You must read  the product’s MSDS safety instructions before starting to work with it. f

Manufactured by Denver Paints and Coatings Israel Ltd., P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard