Polyflex gas and water pipes sealing 225

Polyflex gas and water pipes sealing 225

Gas, water, pipelines, welding sealing and protective coating – polyurethane rubber.

Polyplex  A 225 for sealing gas pipes, water pipes, water reservoirs, concrete pipes.

Polyplex gas and water pipes sealing 225A polyurethane rubber www.denber-paints.co.il

Multi-thickness elastomeric polyurethane rubber membrane for sealing and flexible protective coating from blows and bruises for exposed and underground piping.

Polyplex gas and water piping sealing 225A polyurethane rubber www.denber-paints

Sealing fuel tank farms in 2015 in China www.denber-paints.co.il

A unique coating of an extremely strong flexible membrane, the wear-resistant coating has a unique chemical structure with an extremely high amount of chemical bonds that creates an impenetrable chemical matrix, which completely seals against the passage of gases and water and allows for elongation and contraction according to temperature changes. Strengthens the existing infrastructure and gives a smooth, washable and very strong layer suitable for regular use including resistance to the loads and pressures of huge amounts of water. Seals and bridges across capillary cracks. In the gas industries, it is used as a sealant for tanks and piping from the inside and outside to prevent gas leaks. A bomb shield in an overhead pipeline. and protects underground piping from damage while covering.

Passed gas tightness tests at the Proton Institute, test report No. 2116  RFT –  attached to this specification.

• Mitzpe pipelines and reservoirs and gas and water tanks of all kinds, hermetically sealed that prevents the passage of gas and water.
• 100% solids, does not contain solvents/thinners, can be applied in closed places without odor and without solvents in the air.
• Flexible extends by  at least 150%  and bridges capillary cracks.
• Seals and strengthens concrete pipes.
• Excellent adhesion to the infrastructure.
• Suitable for internal and external coating.
• When exposed to the sun, add a protective layer “Denbergloss Acrylic”.
• Suitable for coating underground pipes as a protective layer that seals and protects from damage.
• Resistant to blows and scratches and heavy loads.

Polyplex  A 225 for sealing gas pipes, water pipes, water reservoirs, concrete pipes

Uses:

• For a sealing and protective coating for overhead, underground and offshore gas pipelines.
• Upper and lower fuel piping sealing.
• for sealing water pipes.
• For coating water reservoirs and water storage tanks and concrete, steel, fiberglass and other piping.
• Coating reservoirs and drinking water tanks as a flexible, sealing base layer before painting with epoxy 2300 approved for drinking water.
• Thick coating in one casting of cracked water reservoir floors.
• For internal and external coating of gas tanks and gas pipelines.
• For coating welding seams in piping and containers to prevent leaks.

Technical data:

• Theoretical coverage – 1 liter per 2 square meters on a smooth wall. 2-5 liters per square meter for floors depending on load resistance requirements.
• Flexibility – 1 mm (sheen)
• Elongation – 150% <
• Density – 1.2-1.4 gm/cm ³
• Mixing ratio – 3:1
• % solids – 100%
• Recommended layer thickness – for gas piping 2-3 mm and up to 5 mm as a protective layer against mechanical damage. Water reservoirs – in walls with a roller thin layers of 100-200 microns without leakage and up to 500 microns total minimum.
• Hardness – after 28 days SHORE D – 70
• Compressive strength – 800 kg/cm2
• Tensile tear strength at a speed of 100 mm per minute – 60 kg/cm2 (ASTM D-412)
• Electrical insulation level – X10 ¹⁴  5 ohms/cm3.

This technical specification is for non-binding general information only. and

Manufactured by Denver Paints and Coatings Israel Ltd. , PO Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard

For full specifications:  Polyplex gas and water piping sealing 225A