Topcolor Matt Eckerstein tiles

Topcolor Matt Eckerstein tiles

Eckerstein color for interlocking tiles and stones

Topcolor Matt Eckerstein wear-resistant sealer – the color of interlocking stones and tiles in shades of red, gray, orange, white and more.

Eckerstein Matt Interlocking Tiles Sealant Color Resistant to Wear – Fine Silk Matte Top Synthetic Paint Resistant to Wear for Painting Pavements and Roads Made of Interlocking Stones Eckerstein. Corresponds to the requirements of TI 756.

Ackerstein paint – synthetic top coat paint, for integrated sidewalks and roar stones   

Decorative synthetic paint in  Eckerstein shades , for painting and renovation for the beautification and protection of sidewalks and roads with interlocking stones as well as tiled roofs. Does not contain lead

Characteristics:

• One-component, ready to use after dilution and mixing.
• Used as an abrasion-resistant top paint in Eckerstein and other shades (Hamra red, terracotta, orange, blue, mustard, white, gray)
• Seals and prevents water penetration.
• Smooth decorative.
• Very washable, resistant to rain for many years.
• Easy to apply by any means possible.
• Reasonable mechanical strength.
• Excellent resistance to outdoor conditions, UV resistance
• Excellent adhesion to interlocking stones and tiles.

uses:

• For painting sidewalks with interlocking stones.
• For painting Dutch roads with interlocking stones.
• and for painting tiles.

Topcolor Matt Eckerstein wear-resistant sealer – the color of interlocking stones and tiles in shades of red, gray, orange, white and more.

Technical data:

• Consumption – 150-100 grams per square meter.
• Coverage – 1 liter per 10-15 square meters) for all shades.
• Recommended layer thickness – 40-65 microns horizontally.
• Recommended number of layers – 1-3 for perfect coverage.
• Wet thickness per spray layer – 120 microns.
• Flexibility – 1 mm (sheen) passes the test of Israeli standard 935 section 307.
• Grinding minutes – up to 50 microns (Ti 785 part 15 – up to 60 microns).
• Density – 1.10-1.25gm/cm ^3  .
• % solids by volume – 50%  <  (in white shade – 55% by volume).
• Resistance to immersion in water – no bubbles, no softening, no change in adhesion, (TI 935 section 312)
• Bleeding resistance – no less than level 6 according to ASTM D-868 and ASTM D-969
• Viscosity -0.5-1.5 sec (HAAKE) 1,000-2,000cPs  ( Brookfield) 
• Stiffness – Dg10 < (Ericsson)
• Abrasion – 120 microns – 850 cycles (Gardner) ASTM, American standard ASTM D4060 Dry film thickness 200 microns, weight loss – 2 grams per 500 cycles (standard – up to 2.5 grams authorized loss)
• Heat resistance up to 70 degrees Celsius without change in properties and deformation.

variety:

• Eckerstein – Hamra red, terracotta, orange, blue, mustard, gray, white (Eckerstein crossings and white tiled roofs).

Lightning:

• Silk matte.

Dilution:

• Brushing/rolling – 5-10% mineral turpentine.
• Spraying – 12-30% thinner D-18 pressure 3-4 atm.
• Airless – 5-10% thinner D-18 pressure 5-6 atm Diza “0.015.
• Immersion – 60-80% mineral turpentine.

Area preparation:

• Thorough cleaning of dust, grease, dirt, can be done with degreaser Z, spread and rub well with a road sweeper and wash with high water pressure. (If washing with water pressure, wait for complete drying)

packing:

• 5 liters, 18 liters. also

This technical specification is for non-binding general information only. also

Manufactured by Denber Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard.