Bathtubs and sinks paint

Bathtubs and sinks paint

Do-it-yourself bathroom painting – Denber Colors

Paint for painting bathtubs and sinks in white and shades

Hard, multi-solid ,  high-strength ,  UV – resistant  two-component upper coating  for durability in particularly difficult conditions in wet rooms in extreme humidity conditions. Suitable for painting walls, bathtubs and sinks. For resistance to household cleaning agents, solvents and abrasion as a top color for durability for many years.

Ceramic tiles paint for renewing baths, basins  and bathroom ceramic/porcelain walls 2:1 POLYURETHANE TWO COMPONENT TOP COAT  PAINT DURABLE IN HUMIDITY HARD DEMANDS

Bathtubs and sinks paint www.denber-paints.co.il

Bathtubs and sinks paint www.denber-paints.co.il

For a tutorial video on how to paint the bathroom, see a video below 

Bath before and after:

 

Painting instructions:
The bathtub must be thoroughly cleaned of dust, dirt and loose paint. It is recommended to rub with fine sandpaper to remove scale and obtain a uniform surface.
The mixture for coloring must be prepared together with thinner D-11 and together with hardener for painting the bathroom that comes with the product in the following ratio: 2:1:1 (that is, for each glass of the material for coloring the bathroom, put in the mixture half a cup of thinner D-11 and half a cup of hardener) and mix the mixture until a uniform and smooth solution is obtained.

As mentioned, the thinner does not come with the product and must be purchased separately at this link.
There is no need to purchase the hardener for painting the bathroom because it comes with the product.

Then paint the first layer with a brush/roller, wait 8 hours and paint with a second layer.

Final drying that allows you to go back and use the bath, is after 16 hours from the second dyeing.

Paint for painting bathtubs and sinks in white and shades

Characteristics:

  • Water and underwater resistance
  • Resistant to solvents and household cleaners
  • Smooth and hard finish.
  • Flexible for bending and hard for abrasion.
  • Very washable and repels dust and dirt.
  • Excellent adhesion to the infrastructure.
  • UV resistant, resistant to sun exposure.
  • Heat and cold resistance.
  • Very high gloss or other as required.
  • quick drying.

 Uses:

  • As a top layer on ceramic and porcelain walls in bathrooms and kitchens.
  • For painting bathtubs, jacuzzis and sinks.

Technical data:

  • Theoretical coverage – 1 liter per 10-15 square meters.
  • Recommended wet layer thickness 200-250 dry microns.
  • Recommended dry layer thickness – 120-150 microns.
  • Recommended number of layers – 2

Paint for painting bathtubs and sinks in white and shades

  • Base to hard ratio – 2:1
  • Pot life = working time from the moment of mixing B+A – 6> hours.

Color:

  • white
  •  In shades by phone order only (extra charge)

Do-it-yourself bathroom painting – Denver Colors

Paint for painting bathtubs and sinks in white and shades

Touch drying :

  • 4 > hours.

Drying between layers:

  • For another layer by spraying – 30 minutes, hard drying – 8 hours, final drying – 12-16 hours.

Application methods:

  • Brushing, rolling, spraying.

Dilution:

  • To spray – 10-35% thinner 11 – D pressure 3-4 at’.
  • Brushing/rolling – can be applied without dilution or up to 20% in thinner 11 – D if application streaks or “orange peel” are formed during application.
  • In the summer, to slow down drying if OVER SPRAY is formed, it is recommended to add a retarder.

Packing:

  • 1+0.5 = 1.5 liters
  • 3.35+1.65 = 5 liters.

This technical specification is for  non-binding general information only.

Manufactured by Denber Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard

You can order a professional: Aaron – 0505911028

To the old site http://www.denber-paints.co.il

For full specifications and videos to do it: Do-it-yourself bathroom painting