EPOXYDEN SHIP TOP COAT  CLEAR/TINTED

EPOXYDEN SHIP TOP COAT  CLEAR/TINTED

Transparent and colored top ship epoxy for vessels

Epoxy for painting interior spaces in vessels, walls and floors of crew rooms, engine rooms, warehouses, railings, stairs, columns, piping

Two-component for painting vessel parts and interior spaces of all types without exposure to the sun

Clear/variegated epoxy topcoat, two-component, decorative, lead-free and chromate-free for painting vessels for parts not exposed to the sun.

EPOXYDEN SHIP TOP COAT  CLEAR/TINTED  – TWO COMPONENTS FOR INTERNAL  MARINE PARTS METAL PARTS, ALUMINUM, ETC 

Transparent top ship epoxy and colors for vessels www.denber-paints.co.il

A colored top for painting on an epoxy base, especially strong with a unique molecular structure that complies with the requirements of the American standard, manufactured in accordance with the requirements for zinc and chromate content and in the colors specified in the standard in additional colors according to Fed. St. 595, the RAL catalog, the BS catalog, the BAM-C catalog and more…

The paint creates a strong protective layer with high adhesion to an epoxy primer, suitable for painting interior vessel parts made of steel, aluminum alloys, fiber, etc. that have undergone appropriate surface preparation and primer.

Characteristics:

• Suitable for painting interior vessel parts.
• Top paint with mechanical strength and high adhesion to an epoxy base.
• Transparent, white and colored and creates a proper protection for the painted part for durability in unusual marine conditions.
• Perfect top for painting metal parts such as steel, aluminum and aluminum alloys and fiber.
• Protects from oxidation or rust in ferrous metals.
• Resistant to alkaline solutions and mixed acids and abnormal humidity conditions.
• powerful
• Easy to apply and repaint and dries quickly.
• Resistant to sea water.
• Resistant to fuels and oils.
• and resistant to detergents.
• and resistant to scratches and blows.
• Suitable for painting interior walls and floors in machine rooms and living rooms.
• Coat the painted part with a thin and uniform and decorative layer in shades.
• Easy to wash.
• Excellent mechanical strength and resistance to wear under light loads.
• Resistant to momentary heat up to 200 degrees and more prolonged heat up to 150 degrees.
• Easy to repair at low cost.
• Ready for repainting the same day after 12 hours.
• High coverage area.
• High electrical insulation.

uses:

• For indoor use without exposure to direct sunlight.
• As a top for interior parts and areas in vessels.
• To strengthen the chemical resistance of items exposed to a chemical or salty corrosive atmosphere.
• For painting interior walls and floors in vessels.

Two-component for painting vessel parts and interior spaces of all types without exposure to the sun

Technical data:

• Cover – 1 liter per 108 square meters in a layer of 50 dry microns minimum. f
• Flexibility – 1 mm (sheen) f
• Density – part A 1.2-1.45 gm/cm ³  , part B 0.85-0.95 gm/cm ³  (1475 (ASTM D
• Stiffness – >10 Dg (Ericsson) f
• Amount of solids – part A by weight 68%, part B by volume 52% (ASTM-D-2369) and
• Recommended layer thickness – 125 microns wet. 50 microns dry (minimum values) and
• Recommended number of layers – 2 -1
• Pot life (working time from the moment of mixing A with B) – 4 hours. and
• Mixing ratio A:B – 2.5:1 by volume. and

packing:

• 3.6+1.4= 5 liters.

This technical specification is for  non-binding general information only. and

Manufactured by Denver Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard

Recommendations: Magrek – the color of ships