Epoxyden black antistatic 100% solids for pouring
Antistatic epoxy for casting floors black 100% solids.
Casting antistatic epoxy floors 10 4 -10 8 Ohm
Antistatic epoxy coating resistant to hard abrasion for floors in one thick casting, two components, hard top, 100% solids, self-leveling, special for coating floors in casting , in many shades, for electronics laboratories and test and control rooms with sensitive and precise electronic equipment, clean rooms, rooms with measuring equipment Exact, battery rooms and others, for resistance to particularly difficult conditions including resistance to chemicals and severe abrasion, also for driving forklifts, especially suitable as a smooth monolithic intermediate coating for antistatic floors in preparation for a final coating with Siler Danbergloss. A system that eliminates the use of copper strips.
Epoxyden black antistatic 100% solids for pouring. www.denber-paints.co.il
EPOXY BLACK ANTISTATIC – Antistatic floor mid. layer leveling coat. by pouring thick layer, 100% solids, self-leveling. To coat with Denberggloss antistatic sealer to eliminate the need for cooper strips.
Antistatic epoxy for casting floors Black www.denber-paints.co.il
Characteristics:
- High-quality electrical conduction, which removes static electricity for grounding. Conducts electricity well and works even without the copper strips.
- Very thick and powerful. Resistant to blows, scratches and large loads. With a thickness of 3 mm it is suitable for a floor on which heavy logistic tools move, with a thickness of 1 mm it is suitable for pedestrians and medium loads of lift trucks up to 1 ton.
- Levels itself. Creates a smooth and hard surface – monolithic without seams, beautiful to look at and easy to clean.
- 100% solids – no evaporation of solvents (thinners) and bad odors and can be applied in minimal ventilation conditions.
- Resistant to acids and alkalis according to the attached table.
- Resistant to standing water and also to those mixed with industrial and chemical waste for a long time.
- and resistant to fuels and oils. Resistant to detergents and industrial chemicals. UV resistant
- and resistant to blows, scratches and heavy loads.
- Very washable and repels dust and dirt.
- Excellent adhesion to any hard infrastructure and especially to the epoxy floor primer and antistatic primer.
- It is easy to apply in casting as it has self-leveling ability.
- Heat and cold resistance. Resistant up to 200 ° C for short periods and 100 ° C heat for a long time.
Casting antistatic epoxy floors 10 4 -10 8 Ohm
Uses:
- An intermediate layer for leveling the floor to obtain a uniform and stable conduction in the final layer Sealer Danbergloss.
- Coating floors and roller shutters and work surfaces in control rooms, clean rooms, electronics factories and laboratories – to prevent the effect of static electricity on sensitive electronic equipment.
- For coating floors in battery rooms.
- Coating floors and work surfaces in factories and warehouses of weapons and ammunition to prevent explosions .
- Coating floors in factories and warehouses containing cartons, paper, thinners and flammable materials to prevent ignition.
- For static electricity control in production halls and others
Technical data:
- Consumption – 1 liter per 1 square meter with a thickness of 1 mm, 3 liters per square meter with a thickness of 3 mm.
- Recommended layer thickness – 1-5 mm according to load resistance needs.
- Density – 1.3-1.7 gm/cm 3
- Base to hard ratio – 2.5:1 by volume.
- % solids – 100%.
Packing:
- 3.6+1.4 = 5 liters. 15+3 = 18 liters
For the attention of the user:
This technical specification is for non-binding general information only. and
Manufactured by Denber Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard
For the full specification: antistatic epoxy for casting Epoxyden Floor 100% black
English
עברית
Русский