Silk Silk Super Acrylic 4000
Acrylic exterior wall paint, washable, durable, scrubbing, luxurious silk shine
SILKY SUPER ACRYL 4000 WALL PAINT – INTERIOR/EXTERIOR ACRYLIC EMULSION PAINT
Approved by the Israeli Standards Institute, standard 1945, and carries permit number 70005.
Characteristics:
- Bright white color or stable shades in a large selection. and
- Decorative silk sheen. and
- Excellent sealing capacity.
- Breathes and allows steam to pass out.
- Excellent adhesion to the infrastructure.
- High coverage.
- Very washable and resistant to scrubbing.
- Resistant to the climatic conditions in the country.
- UV resistant
- Easy to apply by applying and spraying, quick drying.
- Produced in 1000 shades
Acrylic exterior wall paint, washable, durable, scrubbing, silk shine
uses:
- For painting all types of exterior and interior walls.
- For painting concrete surfaces, plaster, asbestos, bricks, plaster, etc.
- for beautifying old outdoor surfaces.
- For interior and exterior painting.
- In a transparent shade – for coating and protecting natural stone..
Technical data :
- Theoretical coverage capacity – 1 liter per 10-12 square meters
- Average viscosity – 7-11 sec (HAAKE)
- Flexibility – 1 mm (sheen)
- Density – 1.4-1.5 gm/cm 3
- Stiffness – 3 >Dg (Ericsson)
- Abrasion – 120 microns – 500 cycles (Gardner) ASTM
- Resistance to scrubbing – minimum 200 cycles according to the Israeli standard 1945
- Washing – 1000 cycles
- % solids by volume – 60%
- Recommended layer thickness – 40-60 microns and…
- Recommended number of layers – 2-3
containing:
- Fine acrylic emulsion.
- Melanins, pigments.
- Advanced plasticizers.
- Fungicides, preservatives – for outdoor conditions.
- Wetting and leveling agents.
- UV resistance enhancers
- Taxotropic and other additives.
Acrylic exterior wall paint, washable, durable, scrubbing, silk shine
variety:
- Transparent, bright white, shades according to the Denver Acrylic Standard catalog.
- According to the catalog 1000 shades.
Lightning:
- silk.
Touch drying :
- 30 minutes.
Silk Silk Super Acrylic 4000
Drying between layers:
- 3 hours. Final: 12 hours.
Application methods:
- Brushing and/or rolling and/or spraying. (Thesis in fistula or airless)
Dilution:
- water.
- First layer – 20-30%
- Second layer – 5-20%
Area preparation:
- Thoroughly clean dust, grease, dirt and loose paint.
- When renewing an external wall – washed with water pressure 150 atm. Fill dents with Denver acrylic putty, sand and smooth. Spray a base layer of Denbartex Primer if the old paint has completely peeled off or a layer of Danbarcryl 4000 diluted 30% with water as a base layer.
- When renovating an interior wall, sand with sandpaper, remove dust, fill dents with Denver putty, in these areas of the Denver putty apply Dunbrol or preferably a layer of Denvercryl 4000 as a foundation.
primary color:
- For an internal wall – Danbrol , for an external wall – in good condition – Danbrol Super and if the wall is old and crumbling paint with a ” Danbartex Primer ” base layer.
packing:
- 2.5 liters, 5 liters, 18 liters.
This technical specification is for non-binding general information only. and
Manufactured by Denver Paints and Coatings Israel Ltd. , PO Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard and
For the full specification: Silk Silk Super Acrylic 4000