Universal putty epoxy

Universal putty epoxy

Universal putty  Epoxy paste for filling and leveling surfaces

Universal putty epoxy www.denber-paints.co.il

Universal putty epoxy www.denber-paints.co.il

A powerful thick epoxy putty paste, 100% solids, two components, for filling fractures and cracks and leveling areas of concrete and iron and of ceramic tiles and porcelain granite and facing stones of all kinds, on concrete infrastructures, black block, cement plaster, natural stone and more… suitable for putty repairs in cladding Exterior and interior, flooring and panels. To sand ferrous metals and aluminum, glass, wood, marble and more… and to fill spaces between them in any thickness without limitation. Odorless and without thinners.

Resistant in an aggressive corrosive atmosphere also to oil, sewage and chemicals, suitable for underwater work.

EPOXDEN SCHPACHTEL – PAST for fixing and filling and smoothing concrete and metal surfaces.

Characteristics:

  • Excellent adhesion to epoxy, concrete, iron, ceramic, block, stone, .
  • 100% solids – does not contain water or thinners.
  • Can be applied in thick layers.
  • High resistance to pressures and heavy loads. high mechanical strength,
  • Workable and easy to apply.
  • Easy to apply and dries quickly.
  • Resistant to wet and humid conditions, resistant to chemicals and fuels and oils. Resistant to oil, sea water, fresh water, resistant to acids and bases,
  • Suitable for filling as putty for sealing and sealing.
  • Temperature resistant up to 150 degrees.
  • Ready to use.

Uses:

  • Interior and exterior peeling repairs in ship parts above and below sea level.
  • Repairing and straightening fractures in concrete elements and walls in preparation for painting.
  • Repair and sealing and smoothing of sewer pipes for the issue
  • and repair and maintenance of steel and concrete bridges
  • For filling holes and gaps in concrete, steel and others.
  • For anchoring machines in industry to the floor and repairing cracks in the floor.
  • For bonding glass to aluminum and others.
  • To fill the connection of stainless steel parts between them and of iron and glass to stainless steel.
  • Repairs in electric, coal, nuclear power plants, maintenance repairs in factories of all kinds.
  • Maintenance repair in dams and water reservoirs and piping and piping accessories.
  • Sealing and filling large cracks in buildings, in industry and especially in areas with salinity and a corrosive chemical atmosphere.

Universal putty  Epoxy paste for filling and leveling surfaces

Technical data:

  • Average consumption – 3 liters per 1 square meter for a 3 mm thick layer. and
  • Density -0.2 +  9 gm/cm 3 . and
  • Mixing ratio – 2.5:1 by volume (it is recommended to completely mix part A with part B to prevent mistakes in the mixing ratio). and
  • Recommended layer thickness – at least 3 mm and no thickness limit. f
  • Recommended number of layers – one thick layer. and
  • Working time with the mixture (pot life) – 20-30 minutes at an ambient temperature of 10-30 degrees. and

Colors:

  • Produced in a variety of colors – concrete shade, white, gray, natural beige, brown red, black and more… and

Universal putty epoxy

Universal putty  Epoxy paste for filling and leveling surfaces

Gloss:

  • Matt.

Touch drying:

  • 4 hours, between layers: 24 hours, final for painting – 24 hours, final difficulty – 5-6 days. and

Application methods:

  • Scattering with mortar/plaster trowel/putty and

Dilution:

  • Do not dilute. and

This technical specification is for non-binding general information only. 

For the full specification:  universal putty epoxy

To the old site: http://www.denber-paints.co.il