Anti-rust shield K14 Kapus

Anti-rust shield K14 Kapus

Capus for iron, galvanized, aluminum  burns and neutralizes rust

A chemical preparation that penetrates deep into the metal immediately stops the development of rust in iron and corrosion in galvanized tin and aluminum

Rust prevention shield K14-Kapus – burns and neutralizes chemical rust, which attacks the rust in all its layers until a stable metal layer. Removes the air and moisture and seals the metal from ingress of new moisture and the development of new rust. Used as an initial chemical primer before paint. For direct use on rusty iron, galvanization that has oxidized and turned dark gray, on aluminum oxidized from moisture. Prevents the development of rust and corrosion again.

Anti-rust shield K14 Kapus www.denber-paints.co.il

Anti-rust shield K14 Kapus www.denber-paints.co.il

Features: RUST PROTECTOR K14 – chemical rust and corrosion stopper penetrate deeply and neutralize the rust and prevent new one

  • Burns and kills rust and chemical corrosion.
  • For direct application on rust/light corrosion.
  • Deep penetration capacity up to a stable metal layer.
  • Removes air and moisture and seals the metal.
  • Prevents redevelopment.
  • For quick maintenance when the rusting or oxidation process begins to stop and prevent development.
  • Saves the need for sand cleaning or mechanical rust removal.
  • Resistant to corrosive environmental conditions, high environmental humidity, acidity and alkalinity.
  • Excellent adhesion to rusty metals.
  • Easy to use, quick drying.
  • Resistant to fuels and jet fuel.
  • Chemically combines with the metal.

Uses:

  • Used as a chemical element before painting steel, galvanization, aluminum.

Technical data:

  • Theoretical coverage for the area – 1 liter per 10-15 square meters on a smooth area.
  • Recommended layer thickness – 1 layer of 50 microns wet by spraying.
  • Flexibility – 1 mm (sheen)
  • Density – 0.94-1.0 gm/cm 3
  • Viscosity – 65 kerbs
  • Adhesion capacity – 5 kg/cm2
  • Abrasion – 120 microns – 680 cycles (Gardner) ASTM

Anti-rust shield K14 Kapus

Caps for iron, galvanized, aluminum  burns and neutralizes rust

Containing:

  • Phosphoric Acid.
  • Epoxy resin.
  • Melanes.
  • Deep penetration materials.
  • additives.

Color:

  • Clear.
  • black.
  • gray.

Gloss:

  • Silky, shiny.

Touch drying :

  • 2-4 hours, final – 24 hours, final difficulty – 7 days.

Drying between layers:

  • 4-24 hours depending on the ambient temperature. Fingerprint check.
  • Can be applied wet on wet until fully absorbed and obtaining a smooth surface with a silky shine.

Application methods:

  • Brushing, rolling, better spraying.

Dilution:

  • Thinner XL

Anti-rust protector K14kapus

Capos burns and neutralizes rust

Application instructions and area preparation:

  • Thorough cleaning of dust, grease, dirt, loose paint. Rust scale must be removed with a steel brush.

Packing:

  •  5 liters, 18 liters.

Storage:

  • In a cool and shady place at room temperature.
  • Make sure lids are tightly closed.

This technical specification is for  non-binding general information only.  and

Manufactured by Denber Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard and

For full specifications:  K14 Kpos anti-rust shield