Chroma Key Denbergloss photoreflective for the floor

Luminous, two-component, wear-resistant photoreflective polyurethane paint, special for painting background floors in studios and photo studios, diluted with a suitable thinner.  

CHROMA – KEY- DENBERGLOSS GLOWING POLYURETHANE  PHOTO REFLECTIVE PAINT, FOR FLOORS, SOLVENT DILUTION, FOR IDEAL BACKGROUND FLOOR PAINTING IN PHOTOGRAPHING STUDIOS

A unique color that gives maximum light reflection during photography and projection on the floor, contains special pigment systems.

Characteristics:

• A color with a particularly strong light reflection, glows when the light rays of the camera or projector strike and improves the quality and sharpness of the image.
• The pigment system is sensitive to direct sunlight, therefore suitable for internal use only.
• Excellent adhesion to the infrastructure.
• High coverage on a white background only.
• Fast drying, ready for painting with another layer every 6-8 hours depending on the ambient temperature.
• Easy to apply by applying and spraying.
• In shades of green, blue, white.

Uses:

• For painting background floors in photo studios (and walls) on which films and slides are projected.

Technical data :

• Theoretical coverage capacity – 1 liter per 5-6 square meters (on a white background)
• Flexibility – 1 mm (sheen)
• Density – 1.1-1.25 gm/cm ³
• Viscosity – 5-3.5 Pa.sec (HAAKE)
• Stiffness – 10 Dg (Ericsson)
• Recommended number of layers – 2
• Recommended layer thickness – 80-120 microns.
• % solids by volume – 60%
• Base to hard ratio – 2:1
• Abrasion – 120 microns – 880 cycles (Gardner) ASTM
• Durability in outdoor conditions – 3-6 months in direct exposure to the sun.

Chrome Kay Danbergloss for the floor

Containing:

• UV resistant polyurethane base.
• A mixture of light-sensitive pigments.
• Special plasticizers.
• Fungicides, preservatives.
• Wetting and leveling agents.
• Tropical and other taxo additives.

Color:

• Green, blue, white.

Gloss:

• Matt.

Touch drying :

• 2-4 hours.

Drying between layers:

• 6-8 hours. Final: 24 hours.

Application methods:

• Brushing, rolling, spraying.
• Do not apply on a damp floor.

Dilution:

• Diluter 11 -D.
• Brushing/rolling – first layer 35%, second layer 5-20% (Airless – 5%, Pistolet – 20%)

Area preparation:

• Thorough cleaning of dust, grease, dirt and loose paint.
• Rubbing with sandpaper, filling cracks and peels with epoxy putty, smoothing with sandpaper, thorough vacuuming, painting a white base coat.

Primary color:

• For concrete: white epoxy flour primer
• For wood: white putty compact.

Packing:

• 5 liters, 18 liters.

Storage:

• In a cool and shady place at room temperature.
• Make sure lids are tightly closed.

Shelf Life:

• 12 months in the original packaging.

Cleaning tools:

• Thinner 11 or 21 at the end of painting.

safety:

• Not for food, keep out of reach of children. and
• Flammable, away from heat and fire. and
• Ensure adequate ventilation during application. and
• Wear goggles, gloves, protective clothing. and
• In case of injury – seek medical attention immediately. and

This technical specification is for non-binding general information only . f

Manufactured by Denver Paints and Coatings Israel Ltd. , PO Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard and

Full Lampat: Chroma Key Denbergloss for the floor