Sealer Denbergloss antistatic transparent and in shades

   SEALER DENBERGLOSS antistatic, clear and in colors high conductivity polyurethane paint  resistance 10 ⁴ -10 ⁸  ohm

For application on a dry floor only, do not wet with water. Must polish and vacuum only. Moisture spoils the hard polyurethane of the sealer and white spots appear.

Characteristics:

• Sealer penetrates and is absorbed into the infrastructure
• A high-quality electrical conductor that causes an antistatic electrical discharge that is created during movement and friction.
• Strengthens and prevents abrasive dust.
• Resistant to outdoor conditions.
• Transparent and in shades.
• and resistant to UV radiation
• Resistant to chemicals and thinners.
• And resistant in a thermal market up to 120 degrees Celsius. Resistant to constant heat up to 80 degrees Celsius.
• Flexible sealer.
• High hardness to scratch and resistance to mechanical blows.
• Low electrical resistance, high conductivity for abnormal, high and low electrical currents.
• Two-component, for professional use.
• Resistant to high inrush currents such as lightning as well as differences in the intensity of electric currents.
• Transparent and colored antistatic for floors – 10 ⁴ -10 ⁸  Ohm. ׁׂ

uses:

• Sealing floors in the electronics industry and in flammable and/or explosive industries.
• Coating absorbent concrete surfaces in laboratories with equipment sensitive to static electricity.
• For antistatic coating for walls and floors.

Antistatic static electricity conductor for abrasion resistant grounding

Technical data:

• Theoretical coverage – 1 liter per 10 square meters (wet layer 100 microns).
• Flexibility – 1 mm (sheen)
• Density – 1.15-1.45 gm/cm ³
• Viscosity – 2-3 sec (HAAKE)
• Stiffness – 10 Dg (Ericsson)
• Hardness – 84 Shore A
• Recommended layer thickness – 40-50 dry microns per layer.
• The amount of conductive materials: 45-55%
• Amount of solids – 65%
• Adhesion – B5 (3359-78 ASTM D-)
• Resistance – a strip 10 cm long and 1 cm wide and 100 microns thick dry – 1-3 kilo ohms on average for most shades. In black you can get 300-900 ohms. Can be ordered with a limited antistatic conductivity of 10 ^4-8  .
• Number of layers for floors – 2 layers

containing:

• Elliptical polyurethane resin.
• Melanins, electrical conduction components.
• Special plasticizers.
• additives.

variety:

• Cloudy transparent, light and dark gray, blue, light blue, black, cream, mustard, brown red, and more…

Lightning:

• Matt. % 7 >
• silk 15-45%
• glossy 80-100%

Antistatic static electricity conductor for abrasion resistant grounding

Drying :

• For contact – 0.5-1 hours, final – 6-8 hours, final difficulty – 5 days. and

Application methods:

• Brushing, rolling, spraying. and

Dilution:

• with no. and

Area preparation:

• Thorough cleaning of dust, grease, dirt and loose paint. and
• Polishing and vacuuming. and
• It is recommended to go over the surface with a cloth dipped in thinner or high-quality alcohol to ensure an area free of grease. For heavy greasy dirt, use degreaser M for high-quality degreasing. and

primary color:

• with no. and

packing:

• 2.5+2.5 = 5 liters, 5+5 = 10 liters, 9+9 = 18 liters. and

This technical specification is for non-binding general information only. and

Manufactured by Denver Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard

For the full specification:  Denbergloss transparent antistatic sealer in shades