Denberplast greenhouses Whitening

Denberplast greenhouses Whitening

White paint for bleaching and reducing heat in greenhouses for dyeing nylon and sheets.

Denberplast white paint for bleaching greenhouses www.denber-paints.co.il

Denberplast white paint for bleaching greenhouses www.denber.net

White paint to reduce heat in greenhouses www.denber-paints.co.il — White paint to reduce heat in greenhouses for painting on nylon and sheets www.denber.net

Smooth white acrylic emulsion paint for painting greenhouses and habitats. Extremely washable and suitable for cleaning with water to remove dirt and restore the whiteness. Reflects over 85% of the infrared rays and prevents overheating and uncontrolled heat transfer.

Characteristics:

Suitable for external uses for painting all types of PVC and polyethylene sheets.
Produced in bright white shade 101.
The ability to reflect the sun’s rays is over 85%.
Prevents overheating of the sheets and the heat inside the greenhouse.
Excellent adhesion to PVC and polyethylene infrastructure.
High coverage.
Very washable.
Quick drying, ready to paint with another layer within an hour in the summer.
Easy to apply by applying and spraying.

uses:

for bleaching greenhouses

Technical data :

Theoretical coverage capacity – 1 liter per 8 square meters.
Effective coverage – on a foundation without a foundation – 1 liter 3-5 square meters, on a foundation or existing paint – 1 liter per 8-15 square meters depending on the shade.
Flexibility – 1 mm (sheen)
Density – 1.35-1.45 gm/cm ³
Viscosity – 5-4.5 Pa.sec (HAAKE)
Stiffness – 3 Dg < (Ericsson)
Recommended number of layers – 2-3
Recommended layer thickness – 40-60 dry microns.
% solids by volume – 55%
Abrasion – 120 microns – 460 cycles (Gardner) ASTM
Resistance to washing – 1000 cycles without removing the color

White paint to reduce heat in greenhouses for painting on nylon and sheets

variety:

Bright white, transparent, standard shades according to the Denver Acrylic panel, 1000 shades of a color palette and more without limit.

Lightning:

Matt.

Touch drying :

30 minutes.

Drying between layers:

1-4 hours. Final: 6 hours.

Application methods:

Brushing, rolling, spraying.

Dilution:

water.
Brushing/rolling – first layer 20-30%, second layer 5-20%

Area preparation:

Thorough cleaning of dust, grease, dirt and loose paint first.

packing:

5, 18 liters.

storage:

In a cool and shady place at room temperature.

Shelf Life:

12 months in the original packaging.

Cleaning tools:

Tap water and soap at the end of painting.

safety:

Not for food, keep out of reach of children.
Ensure adequate ventilation during application.
Wear goggles, gloves, protective clothing.
In case of injury – seek medical attention immediately.

warning:

Do not apply at a temperature lower than +5 degrees Celsius. and
Do not mix with materials not recommended by us. and
Avoiding contact with the skin and eyes, causes dryness and irritation of the skin. In case of contact, wash with plenty of running water and seek medical attention. and

Quality Inspection:

In the laboratories of our factory according to the specification. and
ISO 9001-2015 and

This technical specification is for non-binding general information only. and

Produced by Denber Paints and Coatings Israel Ltd. , and