Acryl Car Filler
A layer of scratch filling and smoothing preparation for car paint – for gentle polishing before paint
Filler foundation for polishing to prepare for painting
Characteristics:
- High amount of solids, well fills holes remaining in the tin material after polishing.
- Can be polished with sandpaper with soap for a smooth and perfect finish.
- Scratch resistant.
- Flexible to vibrations and does not crack easily.
- Repels moisture and prevents penetration.
- Resistant to extreme cold and heat cycles.
- Excellent adhesion to the infrastructure.
- UV resistant
- Easy to apply and dries quickly.
- Ready for repainting and/or repair on the same day and even within a few hours in the summer.
- Does not contain lead, mercury, cadmium.
Uses:
- Filler before painting vehicles, mobile equipment, trains, etc.
Technical data:
- Theoretical coverage – 1 liter per 8 square meters depending on the number of holes in the polyester putty.
- Flexibility – 1 mm (sheen).
- % solids – 70% <
- Density – 1.2-1.3 gm/cm 3 .
- Viscosity – 20,000 cps (Brookfield).
- Stiffness –>3 Dg (Ericsson).
- Abrasion – 120 micron – 1300 cycles (Gardner) ASTM
- Recommended layer thickness – 120-150 wet microns.
- Recommended number of layers – as many as necessary to perfectly fill the area
Filler foundation for polishing to prepare for painting
Containing:
- Special acrylate.
- Melanins, pigments.
- Special plasticizers.
- Soft inks allow easy polishing.
- Solvents, additives.
Colors:
- gray, beige, white,
Gloss:
- Matt.
Touch drying :
- 10 minutes. (Due to the rapid drying that prevented over spray “dust” during spraying).
- If “dust” is formed during spraying, retarder should be added and air pressure to the sprayer should be reduced.
Drying between layers:
- 30 minutes. Final: 2 hours. Final difficulty: 24 hours.
Application methods:
- splash.
Dilution:
- Dilutes XL up to 30% as needed and without leaks.
Acrylic Car Filler for a car primer filler for fine polishing before paint
Filler foundation for polishing to prepare for painting
Area preparation:
- Thorough cleaning of dust, grease, dirt and loose paint.
- Rubbing the polyester putty with glass wool to remove grains and blowing with air pressure.
- Filling large holes and dents with car polyester putty and additional polishing.
- Filling nozzles with Denver Acrylic Carfiler and rubbing with glass wool.
Primary color:
- Dunbar one-component acrylic filler or Dunbar Duke putty or two-component compact putty.
Packing:
- 1 liter, 2.5 liters, 5 liters.
Storage:
- In a cool and shady place at room temperature with adequate ventilation.
- Be sure to keep the lid tightly closed.
Shelf Life:
- 12 months in the original packaging.
Cleaning tools:
- XL thinner or 18-D thinner at the end of painting.
Acrylic Car Filler for a car primer filler for fine polishing before paint
Filler foundation for polishing to prepare for painting
Safety:
- Not for food, keep out of reach of children.
- Flammable, away from heat, fire and sparks.
- Ensure adequate ventilation during application.
- Wear safety glasses, solvent-resistant gloves, protective clothing.
- In case of injury – seek medical attention immediately.
Warning:
- Do not mix with materials not recommended by us. and
- Avoid contact with skin and eyes, causes dryness and skin irritation. In case of contact, wash with plenty of running water and seek medical attention. and
Quality Inspection:
- In the laboratories of our factory according to the specification. and
- ISO 9001-2015 and
This technical specification is for non-binding general information only