Thermal insulation coating floors of cooling and freezing rooms

Nano-thin floor coating thermal insulation for industrial cooling and freezing rooms – Thermoseal Polyplex from Denver

Thermoseal Polyplex thin nanotechnology thermal insulation for freezer rooms

Many business owners in the food and drug industry are forced and will be forced to have refrigerated and frozen food and drug storage areas. Thermoseal Polyplex thin nanotechnology thermal insulation is required for freezer rooms

A large refrigerator equipped to house all the food and medicine goods at the required controlled temperature. For the most part these will be industrial cooling and freezing rooms with industrial sized refrigerators. In order for the cold room to be utilized in accordance with all the needs of the business, the company or the organization that owns an industrial cold room, the professional consulting services of an expert in the field will often be required, who will carefully plan the structure of the cold room, floor coating, when the design will contain the full safety requirements from the space, maximum utilization of the space When everything is adapted to the conditions and needs of the business or organization.

The planning of the floor  is a factor of first importance since the floor should be abrasion resistant, cold resistant up to minus 50 degrees, thermally insulated to prevent cold leakage through it and if the floor is a tenant’s ceiling below – to prevent condensation and dripping of water to the neighbor below, which creates mold, fungus, odors Bad and water that drips and prevents the possibility of storage or work. The Denver Colors company exclusively manufactures in Israel floor coatings for freezing and cooling rooms, which are 5 mm thick in total and meet all these requirements. The product is called:  Thermoseal Polyflex . It is applied in the field by the Denver Projects company, using a diamond polishing and suction method.  Primer penetrates concrete . Rolls around in floor-wall connections. and castings of Thermoseal Polyplex up to the desired thickness. A thin layer on an existing concrete floor  without a step  at the entrance to the freezing/refrigeration room, which allows for easy and comfortable use when entering and exiting carts.

Nano-thin floor coating thermal insulation for cooling and freezing rooms www.denber-paints.co.il

Thermoseal Polyplex thin nanotechnology thermal insulation for freezer rooms

Cold room procedure

Nowadays there is a wide variety of organizations, businesses and institutions that need to hold goods for a period of time, in commercial quantities, of medicines or any agricultural product, meat products, chicken, dairy products and frozen food. Also, dining rooms of large government institutions such as nursing homes, hospitals, etc., which need a large amount of food every day, will need industrial refrigeration rooms.

The construction of an industrial refrigeration room structure that will meet special refrigeration conditions will require the advice of a refrigeration engineer and an extensive team that specializes in the field of electrical design and all the other elements that make up such a room.

All the components that will occupy the room must be taken into account when planning and adapt to the size and conditions of the building itself, it is important to plan the capacity of the cold rooms so that they are suitable for the amount of goods that are housed in the industrial cold rooms. In addition, an engine will be installed in each industrial refrigeration room, which will be located in the outer area of ​​the building, so that the heat coming out of the engine will be emitted outside, into the fresh air. And of course choosing and planning the appropriate floor.

Nano floor molding, thermal insulation, deep freeze rooms, Denber Paints www.denber-paints.co.il

An ideal solution for large factories, for very thin thermal insulation

Cold rooms also faithfully serve the IDF, which maintains entire battalions of soldiers who require food. The soldiers are often in outdoor conditions or training. Therefore, cold rooms whose purpose is to preserve food quantities. Such as: meat, vegetables and dairy products, will be ideal for the conditions in which where the soldiers are. Also, large companies and chains of food products that distribute goods throughout the country will have to have cold rooms that will be able to contain the entire amount that the organization or chain will market all over the country.

the containers that reach the cold rooms in order to load the goods. It should also be stored in storage refrigerators so that the goods remain fresh and are not damaged during the transportation process. In the case of medicines, the same should be done. Store the medicines that are kept in the industrial cold rooms. Until the distribution phase in the various pharmacies in Israel.

Thermoseal Polyplex thin nanotechnology thermal insulation for freezer rooms

Occupancy of the cold rooms

Cold rooms will not be enough if they do not have all the appropriate equipment. which is suitable for the goods that are sought to be preserved. Like refrigerators, floors that suit the conditions of the room, etc. It is important that the refrigerators that will be adapted to these rooms are intended exclusively for industry. and contain appropriate cooling volume and temperatures. There are many people working on organizing the cold rooms. which will ultimately make the room efficient and practical for any organization. business or network and will safely keep the valuable goods of any body.

Cold room floors 

The industrial cold rooms should be comfortable and above all practical. To serve the user in the most convenient and efficient way. But above all it is important that they be safe. Therefore also  the floors  of the cold rooms. should match the conditions and temperature that exist in the cooling rooms. Thermal insulation is necessary, which can ensure cleanliness and aesthetics in the space. To prevent anyone staying in the cooling room from slipping and also to prevent the formation of bacteria. which are the product of mold, etc. Therefore, it is not for nothing that the variety of these scenarios must be taken into account. and provide floors with anti-bacterial and safety surfaces for the space of the industrial cold rooms.

Today there are modern and advanced technologies of floors in nanotechnology . having a thickness of 5 mm in total. which provide a perfect and thin solution for the floors of cooling and freezing rooms. which gives a surface without a step. For smooth entry and exit and resistance to cold and deep freezing down to minus 50 degrees.

Among the first in Israel to apply nanotechnology floors to cooling and freezing rooms. There was  Denver Projects Ltd.  which in the last decade has performed hundreds of such floors with great success.

Denver’s method eliminates the need to cut the concrete floor. Insertion of thick insulation plates and heating elements. Allows the construction of a cooling room on any existing floor without the need for hesitation. Where to place the cooling room and how to thicken the existing floor. so that insulation plates can be inserted.

Thermosil Polyplex thin thermal insulation for freezing penetrations www.denber-paints.co.il

Denver Projects Company – Execution with over 30 years of experience