Specifications for coating the floor of Garbage compactors and replacing steel strips and sealing

Specifications for coating the floor of Garbage compactors

and replacing steel strips and sealing – Denber Paints

Specifications for coating the floor of Garbage compactors www.denber-paints.co.il

Specifications for coating the floor of Garbage compactors www.denber-paints.co.il

Garbage compactors sealed floor coating resistant to abrasion
  1. Dismantling concrete around steel strips and below until an existing sealing layer, cutting spikes and removing the steel strips. Exposure of iron and its restoration, sharpening,  anticorrosive epoxy base layer  – Epoxyd zinc phosphate primer , intermediate layer  Solcoat aluminum  – Epoxy ship Solcoat aluminum,  top layer  polyurethane  – DenbErgloss acrylic
Specifications for coating the floor of compressor rooms and replacing steel strips, and sealing www.denber.net

Specifications for coating the floor of compressor rooms and replacing steel strips, and sealing www.denber.net

Exposing sealing edges and connecting to it by casting a sealing layer  Polyplex Floor  – Polyurethane 100% solids resistant to 150% flexible loads, dismantling concrete around drainage channels, examining channel spike connections, if necessary if rusty, removing the channels and restoring the rebar, exposing the sealing and connecting to it and casting a sealing layer , the return of the canals and their anchoring and leveling. Wrapping 2 cm Styrofoam around the channels and pouring  epoxy grout  up to “zero” height. Removing the Styrofoam and pouring  polyurethane 225A 100%  flexibility in place of the Styrofoam and around the channels up to “zero” height.

Garbage compactors sealed floor coating resistant to abrasion

  1. Assembling steel strips according to old or new details as needed, anchoring and sealing the anchoring, strengthening and welding and leveling the steel strips. Grinding and coating of welds, anchors, and profile iron and steel strips with an anticorrosive epoxy layer – zinc phosphate primer epoxy, aluminum sulcot layer – aluminum sulcot epoxy (barrier protection), and a layer of polyurethane – Dunbargloss acrylic.
  2. Pouring epoxy grout around the steel strips and under them until all the spaces are filled.
  3. Polishing the floor of the garbage room with a planetary diamond sander until all the upper shell is removed. pumping.
  4. Applying a primer layer –  epoxy floor primer  on all floor areas. For damp or partially cured concrete –  Epoxyden Floor Primer 450
  5. Filling expansion seams with elastomeric polyurethane mastic –  Polyplex 225 for seams .
  6. Casting a  100% solids Denbergloss Flor polyurethane layer  with a minimum thickness of 5 mm.

Specifications for coating the floor of compressor rooms and replacing steel strips and sealing