EPOXYDEN 3309 for chemicals reservoirs

EPOXYDEN 3309 for chemicals reservoirs

AGGRESSIVE CHEMICAL RESISTANT COATING 100% SOLIDS

Thick powerful high build heavy duty epoxy coating. Strong and thick coat to protect against aggressive chemicals reservoirs and pipes and concrete floors. 100% solids, erosion resist. Suitable for coating reservoirs and pipes as protection coat against acids, bases, solvents, water, salt water, sewer, industrial sewer. Based on special epoxy resins. Providing toughness and chemical and mechanical protection.

EPOXYDEN 3309 עבור מאגרי כימיקלים. www.denber-paints.co.il

EPOXYDEN 3309 for chemicals reservoirs. www.denber-paints.co.il

EPOXYDEN 3309 עבור מאגרי כימיקלים. www.denber-paints.co.il

EPOXYDEN 3309 for chemicals reservoirs. www.denber-paints.co.il

EPOXYDEN 3309 עבור מאגרי כימיקלים. www.denber-paints.co.il

and EPOXYDEN 3309 for chemicals reservoirs. www.denber-paints.co.il

EPOXYDEN 3309 for chemicals reservoirs

AGGRESSIVE CHEMICAL RESISTANT COATING 100% SOLIDS

TABLE OF CHEMICAL RESISTANCE PROPERTIES:

RESULTS ITEM RESULTS ITEM
12 months pass Caustic soda 30% 12 months pass Water, de-ionized
12 months pass Ammonia conc. 12 months pass Seawater, artificial
1 months pass MEK methyl ethyl ketone 12 months pass Salt solution 15%
Destroyed Methanol 12 months pass Paraffin oil
12 months pass Ethanol 20% 12 months pass Petroleum
7 months pass Ethanol 50% 12 months pass Kerosene
Destroyed Ethanol 95% 12 months pass Leaded gasoline (petrol)
3 months pass Butanol 12 months pass Sulfuric acid 30%
12 months pass Octanol 6 months pass Sulfuric acid 72%
2 weeks pass Diaceton alcohol 12 months pass Hydrochloric acid 10%
12 months pass Isopropanol 12 months pass Nitric acid 10%
1 months pass Ethyl acetate 2 months pass Nitric acid 30%
1 months pass Ethylene glycol 12 months pass Phosphoric acid 10%
12 months pass Glycerin 12 months pass Phosphoric acid 43%
1 months pass Benzene 12 months pass Acetic acid 10%
2 months pass Xylene 12 months pass Acetic acid 50%
12 months pass Formaldehyde 40% 1 months pass Acetic acid concentrate
1 months pass Trichloroethylene 12 months pass Lactic acid
12 months pass Tricresylphosphate 12 months pass Ricinoleic acid
12 months pass Tall oil fatty acid

EPOXYDEN 3309 for chemicals reservoirs

AGGRESSIVE CHEMICAL RESISTANT COATING 100% SOLIDS

Properties :

  • Durable in chemicals listed in table above. Not under direct sun.
  • Prevent chemical attack of coated surface.
  • Smooth and tough coat to concrete and steel, easy to wash.
  • 100% solids
  • Heavy duty, high build coat.
  • A thick strong and hard top layer coating resistant to mechanical hits scratches, chemicals and fuels.
  • Provides for long period of time resistance to acids and chemicals with high alkalinity.
  • Very good adhesion to any hard infrastructure including cement and steel alloy on the appropriate primer.
  • Easy to apply by pouring, self-leveling.
  • Drying hard after 24 hr..
  • Durable in high humidity ant salty environment. sewage water and most chemicals and solvents and oils and fuels.
  • Durable in heat and cold environment.
  • Does not contain cadmium, lead, chromates, and isocyanates.

Applications:

  • As medium and top coat for chemical reservoirs.
  • Coating concrete and steel surfaces have contact with aggressive chemicals (see list of them in table above)
  • Internal and external coat to tankers with chemicals.
  • Coating concrete walls and floors under tankers (new and old).
  • Painting tanks and pipes of: fuels, kerosene, jet fuel, kerosene etc.
  • Coating any concrete or metal tankers, reservoirs and pipes for chemicals.

EPOXYDEN 3309 for chemicals reservoirs

AGGRESSIVE CHEMICAL RESISTANT COATING 100% SOLIDS

Technical data:

  • Part A – can be mixed easily and in 5 minutes you’ll receive a smooth and uniform solution.
  • Part B–transparent and clear.
  • Storage durability – 24 hours at 570 C with no sagging or corruption.
  • Theoretical coverage – 1 liter to 2 sqm. in 500 micron layer.
  • Number of layer-2 for walls and 1 thick 1.5-2 mm for floors.
  • Flexibility – 4 mm
  • Bending resist – 30 N/mm2
  • Impact – 1.8 Jaul/mm2
  • Density – 1.1-1.4 gm\cm3
  • Viscosity average A + B – 12,000-15.000 cPs Brookfield)
  • Hardness – >10 Dg (Ericsson)
  • % Solids – 100%.
  • Flash point – non
  • Pressure resist – 86 N/mm2
  • Stretch strength – 18 N/mm2
  • Erosion – 120 microns – 4500 cycles (Gardner) ASTM
  • Ratio by volume – 2.5 : 1 (base-2.5, 1-hardener)
  • Pot life = working time from mixing B + A – 5 liter – 20-30 minutes.
  • Heat resistance 121O C during 60 minutes – NO shade changes to Delta E <1
  • Humidity cabinet – 30 days in 100% humidity in 49 oC – no loss of adhesion or damage to the film after 1 hr. Out of cabinet.
  • Salt spray durability – 3000 hours with no corrosion occurs.
  • Thermal shock – without adhesion loses.
  • Adhesion to metal – 210kg/cm2, to concrete higher than concrete strength.
  • Distilled water resistance for 24 hr. – without losing adhesion or corrosion 1 hr. after taking out of water.
  • Carbon resistance – no loss of adhesion durability 1 after taking out of the solvent.
  • Resistance to oil 1250 24 hours in 121oC – no loss of adhesion 4 hours after taking out of the oil.
  • Hydraulic oil resistance  24 in 66oC. – without losing adhesion 4 hours after taking out of the oil.

EPOXYDEN 3309 for chemicals reservoirs

AGGRESSIVE CHEMICAL RESISTANT COATING 100% SOLIDS

Contains:

  • Epoxy resins, and hardeners
  • Fillers, durable pigments.
  • Special flexibility promoter materials.
  • Additives

Colors:

  • Grey standard, red- brown

 Gloss:

  • Silk

 Dry to the touch:

  • <4 hours.

Drying between layers and final:

  • 16-24 hours, final: 24 hours, hard to use: 7 days

Application methods:

  • Pouring and leveling, and taking of the air with thorns roller
  • Brushing
  • Roller.
  • Spraying after dilution with thinner 4/100
  • For horizontal application – add aerosil/cabosil

Dilution:

  • Without dilution when pouring for casting on floor or fixing holes.
  • 10-35% for spraying, brushing, roller
  • 5-20% for airless spraying, pressure 5 atm. Nozzle 0.026″ or 0.030″

EPOXYDEN 3309 for chemicals reservoirs

AGGRESSIVE CHEMICAL RESISTANT COATING 100% SOLIDS

Surface preparation:

  • Perfect cleaning from dust, dirt or grease or loose paint (with Degreezer M)
  • Preparing concrete floors: planetary polishing with diamond stones in vacuum or shot blast machine.
  • Preparing metal surfaces: mechanical cleaning with brushes made of steel/bronze if flammable environment or clean with sand blast to get white metal SA 2.5 . Chemical cleaning: removing rust with Degreezer 3000 and burned oils and grease with Degreaser M
  • Primer coat: 50 micron layer. wait until thickly but not completely dry and apply the Epoxyden 3309 in thickness of 500 micron min.
  • Primer Epoxyden 450 for damp floors or Epoxyden floor primer – standard primer for dry surfaces.
  • Fill holes with grout epoxy.
  • Open the concrete cracks and stitches and fill with elastomeric 225A.
  • With Diamond disk make thresholds (mechanical anchor). width of 1 cm and depth of 5 mm. in steel connection with concrete – this will be about 1 cm slot from the steel.

Primer:

  • For iron – Epoxyden 19 antirust or Epoxyden primer rust converter.
  • For concrete – Epoxyden floor primer or Epoxyden floor primer 450 for damp surfaces.

Packaging:

  • 3.6+1.4 = 5 liter, 13 +5 = 18 liter,

Storage:

  • In a cool shaded place in room temp. with proper ventilation.
  • Keep lids tightly closed.

EPOXYDEN 3309 for chemicals reservoirs

AGGRESSIVE CHEMICAL RESISTANT COATING 100% SOLIDS

Shelf life:

  • 12 months in original package.

Tools cleaning:

  • Thinner 4/100-D at the end of painting.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Safety precautions:

  • Inedible, keep away from the reach of children.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S

EPOXYDEN 3309 for chemicals reservoirs

AGGRESSIVE CHEMICAL RESISTANT COATING 100% SOLIDS