Tutgum Universal white/black DTM direct to metal. Denber paints

Tutgum Universal white/black DTM direct to metal

Direct to metal paint primer and top coat

Tutgum Universal white/black DTM. www.denber-paints.co.il

Primer and top coat for metal, aluminum and galvanized steel

Single component primer and top coat paint that is based on unique solvent acrylic copolymers with phosphate zinc pigments that adhere outstandingly to black iron, aluminum and galvanized steel after surface preparations. The paint is strong durable, thick, anticorrosive and is used as a primer and a top coat all in one layer application creating a smooth high build fast drying and elegant finish.

Tutgum Universal white/black DTM direct to metal

Direct to metal paint primer and top coat

Properties:

Industrial and professional use
Has a very strong adhering ability to iron, aluminum and galvanized steel.
High build, applicable in one thick
Provides long lasting rust
Used as a decorative final
Fast drying, can be repainted within an
Primer and a top coat all in one
Has an excellent connection between different
Durable in heat and extreme weather
Suitable for chemicals and sea salt
A 400 micron layer can be applicable for extreme
Hard, scratch durable and shock

Applications:

For coating metal grates and railings, metal objects and
For painting light and electric columns.
For aluminum products, galvanize products and iron products.
For industrial

Tutgum Universal white/black DTM direct to metal

Direct to metal paint primer and top coat

Technical specifications:

Theoretical cover area: 15-20 sqm per
Cover area at the recommend layer thickness: 8 per liter.
Recommended layer thickness: 125
Number of recommended layers: 1-2
Flexibility: 1 mm (SHEEN)
Density: 1-1.4 gm/cm3
Viscosity: 2-2.5 sec (HAAKE)
Hardness: > 3 Dg (Erichsen)

Contains:

Copolymer-acrylic resins.
Special flexibility
Phosphate zinc and zinc magnesium oxide UV ray endurance
Pigments, solvents and

Colors:

White and a various number of colors.

Tutgum Universal white/black DTM direct to metal

Direct to metal paint primer and top coat

Gloss:

Matte, silk, glossy.

Touch-dry time:

20-40 (avoid over spraying)
If dust is formed while spraying add a retarder .

Drying time period betweel!l layer application:

1-4 Final: 2-6 hours.

Application methods:

Brush, spray, roller

Dilution:

Brush/roller: 5% – 10% D-18 thinner or mineral spirit/turpentine.
For slower drying and creating a surface without any brushing marks use the D-32
Spraying: 15% – 20% D-18 thinner 3-4
Airless: 5% 4-5 nozzle 0.015”-0.018”.

Tutgum Universal white/black DTM direct to metal

Direct to metal paint primer and top coat

Surface preparations:

Black steel: Remove rust by sand blast cleaning (level SA-2.5) or by mechanical or chemical cleansing (rust remover 3000) until receiving white
Remove grease thoroughly with Degreazer
Aluminum: Remove grease with Degreazer M, etch with Antrox 14, and coat with yellow passivation with Passivator 1722.
Galvanized steel: Lightly polish to remove zinc salt and completely remove the galvanized shine, polish with sandpaper or a disk, after removing the shine clean the surface with Degreazer M to completely remove all (Dont wipe the surface with the same rags, avoid spreading old grease on different parts of the surface)
Old galvanization: Harshly polish to remove rust, lightly polish where zinc salt and shine should be removed, and remove grease with Degreazer M.

* Strict supervision is required while preparing the surface according to the instructions, which is the costumer’s complete responsibility. If the instructions will not be completely fulfilled the paint will peel.

Packaging:

0.5 liter, 0.75 liter, 2.5 liter, 5 liters, 18 liters.

Tutgum Universal white/black DTM direct to metal

Direct to metal paint primer and top coat

Storage:

In a shaded and cool place at room temperature with proper ventilation.

Shelf life span:

12 months in its original

Equipment cleansing:

Use D-18 or mineral

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Tutgum Universal white/black DTM direct to metal