Silicon acrylic high temperature paint

Silicon acrylic high temperature paint

Heat durable up to 200°C

Silicon acrylic high temperature paint. www.denber-paints.co.il

Silicon acrylic high temperature paint. www.denber-paints.co.il

One component Silicone Acrylic paint for coating hot elements of heat until 200°C, in silver shade up to 250 degrees Celsius.

SILICON ACRYLIC -A HIGH-TEMPERATURE PAINT FOR 200 OC, aluminum 250 OC 

Paint  that combines features of silicone and acrylic, very easy to use in maintenance of heat emitters elements.

Silicon acrylic high temperature paint

Heat durable up to 200°C

Features:

  • Durable in scratches.
  • Durable in heat up to 200 degrees and aluminium shade up to 250 degrees.
  • Several color shades.
  • Suitable for painting up to 80 degrees on a hot infrastructure
  • Economical,  thin layer paint needed.

Uses:

  • For heat-plumbing
  • Paint ovens and heating  water systems.
  • For heat changers.
  • For chimneys.

 Technical data:

  • Effective coverage – 1 litre to 5-10 sqm.
  • Flexibility – 2 mm (sheen)
  • Density – 1.1 – 1.3 gm/cm3
  • Viscosity – 1000-3000 Pa.s (brookfild)
  • Hardness – 3 Dg. (erichsen)
  • Erosion – 120 mic. Film – 1560 cycles (gardner) ASTM
  • Recommended layer thickness – 50-75 mic. Wet film
  • Recommended number of layers – 2-3

 Contains:

  • Silicon acrylate.
  • Melanim,
  • Fillers.
  • Pigments.
  • Special flexibility materials.
  • Solvents, additives

Silicon acrylic high temperature paint

Heat durable up to 200°C

Shades:

  • silver, red, gray, green, red, Brown, black, mustard, etc. …

Gloss:

  • Silk

Dry to the touch:

  • 30 minutes. (Due to the quick drying time, avoid from over spray “dust”) if created “dust” while spraying, add retarder and lower air pressure.

Drying between layers:

  • 2-4 hours. Final: 6 hours.

Application methods:

  • brushing, roller, spraying.
  • It is recommended while spraying to keep pressure under 5 atm.

Dilution:

  • Thinner XL.
  • Brushing/roller – first layer  – 10-20%
  • Spraying with spray gun -30% second layer – 5%.

The area preparation:

  • A thorough cleaning required from dirt, grease and loose paint.
  • Sand grains to remove and clean with dry air pressure.

Silicon acrylic high temperature paint

Heat durable up to 200°C

Primer:

  • Steel – sand blast or mechanical cleaning to get white metal, coat with silicon acrylic primer or zinc silicate.
  • Old paint – sand well, remove grease and dirt, with degreaser M, and coat two layers with silicon acrylic.

Packaging:

  • 5 , 18 liters

Storage:

  • In cool and shaded room.

Shelf life:

  • 12 months in original package.

Tool cleaning:

  • Thinner XL immediately after using.

Safety:

  • Not edible, keep away from children reach.
  • Flammable, keep away from heat and fire.
  • Make sure the proper ventilation during application.
  • Put on goggles, gloves, protective clothing.
  • In case of injury-seek for medical care.

Silicon acrylic high temperature paint

Heat durable up to 200°C

Warning:

  • do not mix with materials not recommended by us.
  • Avoid contact with skin and eyes, dries the skin. In case of contact wash with plenty of water and seek medical help.

Quality control:

  • In our laboratories according to the specification.
  • ISO 9001-2015

Note:

This technical specification is to require only general information.

The product is a professional product that only professionals owners already have prior experience as well. This specification is not written as a substitute for counseling/counselor/guidance by the official guide. Must implement a small area first to check for a match before the application of large areas. Contents of this specification are changes over time, updates to the latest versions. Professional guides/counselors names can be obtained by telephone. Read safety instructions MSDS before starting the work with the product.

Silicon acrylic high temperature paint

Heat durable up to 200°C