Epoxyden CM Coal tar 400 mic.

Epoxyden CM Coal tar 400 mic.

Coal tar epoxy heavy duty

EPOXYDEN CM COALTAR 400 – HIGH BUILD FOR COATING AND SEALING FROM WATER PENETRATION ANTICORROSIVE TWO COMPONENT FOR IRON METALS, SHIPS AND BOATS, CONCRETE UNDERGROUND CELLARS WALLS, FOR PIPES coating dipped in water, water reservoirs, plumbing and sewage reservoirs.

Special multi-layer epoxy coat prevents rust on ferrous metals and primer for concrete surfaces. Protects from chemicals and provides perfect water insulation.

Epoxyden CM Coal tar 400 mic. www.denber-paints.co.il

Epoxyden CM Coal tar 400 mic. www.denber-paints.co.il

Epoxyden CM Coal tar 400 mic.

Coal tar epoxy heavy duty

Properties:

  • Flexible, heavy duty, thick layer, perfect isolation, shock resist.
  • Multi-thickness, can be implemented in many layers, rigid and scratch-resistant.
  • A high mechanical strength and a high adhesion to ferrous metals and concrete on a suitable foundation.
  • An excellent and powerful sealing product for many years of durability,
  • preventing water penetration and moisture transition.
  • Anticorrosive and protects from oxidation or rust in ferrous metals in a marine and/or chemical environment.
  • Resistant to alkali solutions and acids and exceptional humidity conditions.
  • Excellent adhesion capacity for infrastructure.
  • Suitable for covering underground structures in the ground.
  • Easy to implement and dry quickly.
  • Ready to repaint with top layer on the same day after 12 hours.
  • Resistant to fuels and oils including jet fuel.

Applications:

  • Sealing layer for underground buildings of parking lots, service floors, shelters, bunkers, etc.
  • sealing layer for drinking water reservoirs, sewage, fire extinguishing, etc.
  • protective coating and sealing layer for underground cables, underwater concrete structures like wooden columns, iron or concrete beams and columns.
  • Sealing the bottom of boats and ships of various kinds.
  • For general uses of vessels to seal connections and corners.

Epoxyden CM Coal tar 400 mic.

Coal tar epoxy heavy duty

Technical Data:

  • Coverage – 1 liter per 12 square meters in a layer of 400 microns dry.
  • Hiding power – 0.95 < in a layer of 58 microns
  • flexibility – 1 mm (sheen)
  • density – Part A 1.35-1.45 gm\cm3, Part B 0.85-0.95 gm\cm3 (1475 (ASTM D
  • viscosity – part A+Part B immediately after mixing – 40 seconds 4#
  • Hardness – 10 Dg (Ericsson)
  • Flashpoint –38 o Celsius
  • Solid Quantity – Part 1 at 85% , Part B of 85% (ASTM-D-2369)
  • Abrasion – 120 microns – 2400 cycles (Gardner) ASTM
  • Recommended layer thickness – 400 microns dry (wet – 500 microns per layer)
  • Number Layers recommended – at least 2
  • drying time per touch – up to 5 hours.
  • Hard drying time – up to 8 hours.
  • Pot Life (working time from the moment of mixing A with B) – 6 hours.
  • Mixing ratio A:B – 2.5:1 in volume.
  • Waiting time after mixing and before starting painting: 10 minutes and stir again with a mechanical mixer.
  • Heat resistance – O C121 for 1 hour without changes in film quality and color tone
  • Distilled water resistance – 4 days at OC 49 temperature – No defects in the color film tested
  • Adhesion Test – Masking tape adhesion and pressing with a 2 kg weight for an hour and removing the masking tape – no peeling of paint
  • removal of paint – 90% or more in 60 minutes in paint remover.
  • Salt spray – durable 3000 hours.

Epoxyden CM Coal tar 400 mic.

Coal tar epoxy heavy duty

Contains:

  • Epoxy resins.
  • Coal tar.
  • Flexibility agents.
  • Pigments and fillers
  • Hardener.

Colors:

  • Black,

Gloss:

  • Silk 25-40% (ASTM D 523) Lens Test 60o

Touch-drying time:

  • 12 minutes to 5 hours according thickness and temperature.

Repainting Gap Time:

  • 6-8 hours, final dry time – 24 hr. Final strength – 7 days.

Recommended Application Methods:

  • Spray, brush, roller.

Epoxyden CM Coal tar 400 mic.

Coal tar epoxy heavy duty

Dilution:

  • Spray gun- 25-30% thinner D-4/100, pressure 4-5
  • Airless – 0-5% thinner D-4/100, pressure 6 Nozzle – 0.026″
  • Roller/brush- 5-10% D-4/100.

Surface Preparation:

  • Mechanical or chemical cleaning until a white metal appears, Aluminum- Antarox 4+ passivator 1722
  • Mechanical: steel brushes ST-2.5.
  • Chemical: rust -“rust remover 3000”, grease -“Degreazer M”.
  • Sand blasting cleaning: level SA 5.
  • Concrete – burn with salt acid and flash with water in high pressure

Instruction for use:

  • Surface preparation as needed.
  • Open carefully parts a & b and stir separately
  • Pour needed quantity ratio base to hardener 2.5: 1.
  • Blend well for homogeneous mixture and add thinner D-4/100 as needed.
  • Blend again and spray first coat, after 4-6 hours minimum sand a little and spray second layer and so on until 400 mic. thickness .

Kit Description:

  • 3.6-liter part A + 1.4-liter part B = 5 liter
  • 13-liter part A + 5-liter part B = 18 liter

Epoxyden CM Coal tar 400 mic.

Coal tar epoxy heavy duty

Storage:

  • Appropriate shaded room with proper ventilation.
  • Keep lids tightly closed.

Shelf Life:

  • 12 months in original sealed

Clean Up:

  • Clean with thinner D-4/100 immediately after complete use.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Safety precautions:

  • Inedible, keep away from the reach of children.
  • Flammable – keep distant from heated areas, fires, flames, and sparks, prohibit smoking in working area.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S

Epoxyden CM Coal tar 400 mic.

Coal tar epoxy heavy duty