EPOXIDEN 19 (2300) Drinking water High Build Epoxy

EPOXIDEN 19 (2300) Drinking water High Build Epoxy

(POWER H.D. 2300) Especially for drinking water

EPOXIDEN 19(2300) Drinking water. www.denber-paints.co.il

EPOXIDEN 19 (2300) Drinking water. www.denber-paints.co.il

Primer/top coat red epoxy paint for metals (3: 1 125 mic.) Special high build multi-layer epoxy coat, with no chromates, for hard demands long term protection on steel and aluminum and concrete.

Approval for drinking water from laboratories of health ministry in Moldova-Europe No. 2321 and Israel institute of standards No. 8412234992

Properties:

  • Flexible, heavy duty, high
  • Fast drying, ready for recoating after 6
  • Tough, scratch resistance.
  • Good adhesion to metal, concrete,
  • Can be applied in some layers for thick
  • Steel-preventing rust in some Concrete-isolation primer filler and decorative top coat.
  • Resistant to salt and wet environment and durable in oils, fuels and
  • Washable and repulsive dust &
  • Suitable for welding

Applications:

  • Painting steel, aluminum & concrete for priming, rust preventing and decoration for water drinking
  • Painting drinking water pipes and reservoirs and tankers internal and

EPOXIDEN 19 (2300) Drinking water High Build Epoxy

(POWER H.D. 2300) Especially for drinking water

Technical Data:

  • Theoretical spreading rate: 1 liter per  15 m 2
  • Coverage – 8 m 2  /liter for 125 wet film.
  • recommended dry thickness: 125 mic.
  • Recommended number of layers: 2-3
  • Density: 1.3-1.5 gm/cm3·
  • Hardness: >3 Dg (Erichsen)
  • Elasticity: 1 mm (Sheen)
  • Viscosity: 6-8 sec (Haake)
  • Mixing ratio A:B – 3:1
  • Flash point: 3 8OC
  • Pot life: 6 hours.
  • Solids: 77%
  • Adhesion to metal: 210 / cm 2

Contains:

  • Epoxy resins
  • Flexibility materials
  • Additives
  • Pigments and fillers

Colors:

  • Black, red oxide, grey

Gloss:

  • Silky

Touch-drying time:

  • 60-120 minutes (avoid Over spray).

EPOXIDEN 19 (2300) Drinking water High Build Epoxy

(POWER H.D. 2300) Especially for drinking water

Repainting Gap Time:

  • 16 hours, final- 24 hours.

Recommended Application Methods:

  • Spray, brush, roller.

Dilution:

  • Spray gun- 15-25% thinner D-4/100 pressure 4-5 atm.
  • Airless- 0-5% D-4/100, pressure 6-7 nozzle- 0.021″/0.023″
  • Roller/brush- 5-15% D-4/100 thinner.

Surface Preparation:

  • Mechanical or chemical cleaning until a white metal appear,
  • Aluminum- Antarox 4 plus passivator 1722
  • Mechanical: steel brushes ST-2.5.
  • Chemical: rust -“rust remover 3000”, grease/oil -“Degreaser M”.
  • Recommended – Sand blast cleaning: level SA 5-3.0.

Instruction for use:

  • Surface preparation as recommended.
  • Open carefully parts a & b and stir separately
  • Pour needed quantity ratio base to hardener 3:1.
  • Blend well for homogenous mixture and add thinner D-4/100 as needed.
  • Blend again and spray first coat 125 , after 4-16 hours spray second layer and etc.
  • Clean equipment after use.

Kit Description:

  • 3.75 liter part A + 1.25 liter part B= 5 liter
  • 13.5 liter part A + 4.5 liter part B = 18 liter

EPOXIDEN 19 (2300) Drinking water High Build Epoxy

(POWER H.D. 2300) Especially for drinking water

Pot life: (for 5 liter mixture)

  • 15°C – 10 h.
  • 20°c – 8 h.
  • 25°C – 7 h.
  • 30°C – 6 h.
  • 35°C – 4 h.

Ventilation:

  • for 10% LEL = 65 M 3
  • TLV = 990 M 3

Storage:

  • Appropriate cool and shaded room temp with proper ventilation.
  • Keep lids tightly closed.

Shelf Life:

  • 24 months in original sealed pack.

Tools Cleansing:

  • Clean with thinner D-4/100 immediately after complete use.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

EPOXIDEN 19 (2300) Drinking water High Build Epoxy

(POWER H.D. 2300) Especially for drinking water

Safety precautions: