EPOXYDEN FLOOR GROUT 100%. www.denber-paints.co.il

EPOXYDEN FLOOR GROUT 100%

3 parts epoxy for grouting

EPOXYDEN FLOOR GROUT 100% www.denber-paints.co.il

High build grout epoxy heavy duty for grouting floors and machines to floors.

It is a three component product, 100% solids, special for grouting by pouring, for durability, waterproofing and harsh conditions including abrasive and chemicals resistance, by adding filler part C to the 2 epoxyden parts parts, for grouting holes and fixing machines legs from moving and /or vibrating.

EPOXYDEN FLOOR GROUT 100%

3 parts epoxy for grouting

Properties:

Can be poured in one thick layer without thickness limiting.
100% solids, no solvents evaporation.
Smooth and high hardness finishing, scratch durable.
Gives the appearance like monolithic floor.
Can be poured for grouting and filling holes in the floors.
Suitable for driving on it with forklifts, cares, and lifting vehicles.
Very good adhesion to any hard infrastructure including cement and steel alloy with appropriate primer coat.
Durable in agricultural chemicals, industry chemicals, oils, fuels.
Resistance to heat and cold.
Durable in high humidity ant salty environment, in many acids and alkali.
Durable in standing water with industrial waste for long periods of time.
High electric isolation.
Does not contain cadmium, lead, chromates.

Applications:

Grouting – for holes fixing anf for machines in industry to fix there legs.

EPOXYDEN FLOOR GROUT 100%

3 parts epoxy for grouting

Technical data:

Part A– can be mixed easily, and in 5 minutes you’ll receive a smooth and uniform solution.
Part B – transparent and clear.
Storage durability – 24 hours at 57⁰ C with no sagging or corruption.
Coverage – 1 liter to 1 sqm. in 1 mm.
For grout – for 5 liter A+B add 10 liter filler part C
Recommended thickness of layer-1-12 mm.
Density – 1.0-1.1 gm\cm³
% Solids – 100%.
Ratio – 2:1 (base-2, hardener-1)
Flash point part A – 255^O part B – 166^OC
Hardness – >10 Dg (Erichsen)
Elasticity – 4 mm (sheen)
Bending strength – 30 N/mm²
Viscosity average A + B – 12,000-15,000 cPs (Brookfield)
Pressing strength – 800 kg/cm²
Elongation strength – 600 kg/cm²
Friction – 120 microns – 4500 cycles (Gardner) ASTM
Impact strength – 2.0 Dg/mm²

3 parts epoxy for grouting

Adhesion to concrete – higher than concrete strength.
Adhesion to Epoxyden floor primer – 245 kg/cm²
Elasticity in dragging – 10% N/mm² (DIN 63457)
Dragging resistance – 8 N/mm2 (DIN 53455)
Electric isolation for clear coat – 1.5×10¹⁴ ohm/cm³
Pot life = working time from mixing A + B – < 20 minutes.
Distilled water resistance for 24 hr. – without losing adhesion or corrosion 1 hr. after taking out of water.
Carbon resistance – no loss of adhesion durability 1 after taking out of the solvent.
Resistance to oil 1250 24 hours in 121^oC – no loss of adhesion 4 hours after taking out of the oil.
Hydraulic oil resistance 24 in 66^oC – without losing adhesion 4 hours after taking out of the oil.
Aviation Fuel resistance – 7 days in room temp. – without losing adhesion 4 hours after taking out of the fuel
Heat resistance 121^O C during 60 minutes – NO shade changes to Delta E = 1.
Humidity cabinet – 30 days in 100% humidity in 49^oC – no loss of adhesion or damage to the film after 1 hr. out of cabinet.
Salt spray durability – 2000 hours with no corrosion occurs.
Thermal shock – without adhesion loses.

EPOXYDEN FLOOR GROUT 100%

3 parts epoxy for grouting

Contains:

Epoxy resins and hardeners.
Fillers, durable pigments.
Special flexibility materials.
Additives

Colors:

Grout – gray, concrete gray.

Gloss:

Glossy

Touch dry time:

For 3 mm thickness – 1-2 hour.

Drying between layers and final:

12-16 hours, final: 24 hours, hard to use: 3-7 days

Application methods:

Pouring and leveling with tooth spatula or roller,

Ventilation:

No solvent evaporation, 100% solids. Minimum ventilation needed.

EPOXYDEN FLOOR GROUT 100%

3 parts epoxy for grouting

Drying time 500 mic. according temperature:

7^OC – first dry – 96 hours, final dry – 15 days
10^OC – first dry – 48 hours, final dry – 10 days
15^OC – first dry – 30 hours, final dry – 7 days
20^OC – first dry – 24 hours, final dry – 3 days
30^OC – first dry – 18 hours, final dry – 2 days
40^OC – first dry – 12 hours, final dry – 1 day

Dilution:

Without dilution.

Surface preparation:

Preparing concrete floors: polishing with diamond stones in vacuum.
Perfect cleaning from dust, dirt or grease or loose paint with degreezer M
Primer Epoxyden 450 for damp floors or Epoxyden floor primer – standard primer clear.
Fill holes with the 3 part mixture grout epoxy.

Primer:

Epoxyden floor primer or Epoxyden anti rust rust remover, Epoxyden floor primer 450 for damp surfaces.

Packaging:

5+2.5 = 7.5 liter (+ 25 kg. quartz filler for grout.= 33 kg. (22.5 liter))
10+5 = 15 liter (+ 50 kg. quartz filler for grout = 66 kg. (45 liter))
12+6 = 18 liter (+ 60 kg. quartz filler for grout. = 80 kg. (54 liter))
18+36= 54 liter (+ 180 kg.quartz filler for grout. = 238 kg.(162 liter))

EPOXYDEN FLOOR GROUT 100%

3 parts epoxy for grouting

Storage:

In a cool shaded place in room temp. with proper ventilation.
Keep lids tightly closed.

Shelf life:

24 months in original package.

Tools cleaning:

Thinner 4/100-D at the end of painting.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Safety precautions:

Inedible, keep away from the reach of children.
Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

EPOXYDEN FLOOR GROUT 100%