Denbergloss floor Antislip teflon agregates floor coat. Denber paints

Denbergloss floor Antislip

Antislip teflon agregates floor coat

Polyurethane Top coat floor paint clear/tinted anti-slip

Aliphatic two component Polyurethane top gentle textured decorative paint/lacquer for floors, prevents slipping. Clear or multi-colored, glossy, silk or matte. Durable for stone floors, concrete floors, epoxy coated and etc. Has high mechanical and chemical erosion endurance in extremely tough climate conditions. Suitable for applying a number of layers. Doesn’t fade even at extensive time exposures under the sun.

Denbergloss floor Antislip. www.denber-paints.co.il

Polyurethane Top coat floor paint clear/tinted anti-slip www.denber-paints.co.il

Denbergloss floor Antislip

Antislip teflon agregates floor coat

Properties:

Prevents slipping on wet floors.
Decorative gentle textured finish.
A tough finish.
Easy to wash.
High hardness.
Endures scratches and mechanical hits.
Endures UV rays, chemicals and solvents.
Heat and cold endurance.
Very high gloss or other by demand, durable for many years.
Dries quickly.
Flexible for bending and tough for erosion.
Very good adhesion to surface.
Easy to apply.
Durable in any external conditions and freezing.
Contains no Cadmium, lead < 0.06% as aloud, contains no chromates.

Applications:

For top floor coating in industrial wet floors.
Wet concrete internal surfaces and other that are exposed to the sun like balconies, sidewalks and other sorts of outdoor
For coating and protecting decorative public floors to prevent slipping when they are wet.
Military uses.
For coating epoxy coated surfaces against slippery.
For dance floors.
and For any concrete or epoxy walking surfaces.
Is not suitable for ramps under moving equipment, in those environments it is recommended to use heavy duty Polyflex 275 or Denbergloss floor 100% solids thick layer with Carborundum (silicon carbide).
For external and internal steel and concrete surfaces needed to be rough.
For coating floors in environment full with chemicals and/or solvent/water vapors.
and For wet floors in reactor rooms, labs etc.
For coating industrial kitchens and food production floors.
For coating bathrooms floors.

Denbergloss floor Antislip

Antislip teflon agregates floor coat

Technical specifications:

Part A – easily mixed by hand and after 5 minutes a smooth form will appear.
Part B – clear
Storage durability – 24 hr. in 57 ^OC with no sagging.
Theoretical coverage: 1 liter for 8 sqm.
Actual coverage for the required thickness: 5 sqm per 1 liter.
Coverage ability: > 0.95 for all shades, yellow > 0.9 in 58 mics. layer.
Recommended dry layer thickness: 125 microns.
Recommended wet layer thickness: 200 microns.
Recommended number of layers: 2
Base to hardener mixture ratio: 2:1
Viscosity: 1-2 sec (HAAKE).
Density: 1.1-1.2 gm/cm3
Hardness: >10 Dg (ERICHSEN)
Flexibility: 100-micron film- 1 mm (SHEEN).
Erosion 120 mic. film: 3600 cycles (BYK Gardener)
Pot life – Work time period since mixing base and hardener: < 6 hours.
Percentage of solids: 66.6 %
Testing the lacquer: 1000 hours in Q-Panel with a UVA-340 light bulb in cycle of 8 hours light at a temperature of 60°C and 4 hours at a temperature of 50 °C, the lacquer successfully passed the test with a minimal color difference without any damaged caused to the The testing was conducted in the substance laboratory of the military defense department enclosed to this section.
Humidity cabinet – 30 days, 100% humidity in 49^OC with no adhesion lose.
Salt spray – 2000 hr.

Contains:

Acrylic polyurethane resin (high OH groups).
Durable pigments.
Solvents,
Additives.
Iso cyanate that endure UV (special aliphatic mixture)

Denbergloss floor Antislip

Antislip teflon agregates floor coat

Colors:

Clear, white, black and all RAL colors, Fed st. 595.

Gloss:

Shiny, matte or silk.

Touch-dryness:

30-60 minutes.

Between coats:

6-8 hour. Final 12-16 hours.

Application methods:

Spray top canister nozzle 1.2, roller or brush.

Thinning:

Spray: 30-35% of D-11 thinner at a pressure of 3-4 In the summer it is recommended to add retarder.
When brushing or rolling use up to 20% thinner in cases where smear stripes are formed.

Surface preparations:

The paint on concrete, epoxy or stone must be totally spotless of any dirt, dust or

As a prime layer use Epoxyden floor primer, if chemical and heavy-load endurance is required use heavy duty Epoxyden floor or heavy duty Polyflex 275 or 225.

Denbergloss floor Antislip

Antislip teflon agregates floor coat

Packaging:

3.35+1.65 = 5 liter. 2.5+5=7.5 liters, 10+5=15 liters.

Storage:

In a shaded place at room temperature with appropriate ventilation.
Keep lids hermetically sealed.

Shelf life-span:

Paint: 12 months in its original
Hardener: 6 months in its original

Equipment cleansing:

Uses D-11 thinner immediately after finish painting.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Denbergloss floor Antislip

Antislip teflon agregates floor coat

Safety precautions:

Inedible, keep away from the reach of children.
Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

Denbergloss floor Antislip