Spray Zincoat Silvery

Spray Zincoat Silvery

Cold galvanization spray

Light galvanized spray, for repairing defects and welding areas in galvanized metals. Pure zinc 98% silvery for repairs and welding areas in an existing galvanized steel. Splashing out of a pressure tank, fast drying, which provides cathode protection for ferrous metals and steel castings, excellent as a continuous coating for a hot galvanization mainly in welding connections to complete the galvanization, the resulting final coating contains pure zinc. Ready to use after intensely shaking the pressure tank.

Spray Zincoat Silvery. www.denber-paints.co.il

Spray Zincoat Silvery. www.denber-paints.co.il

Spray Zincoat Silvery

Cold galvanization spray

Attributes:

  • A light galvanize shade is similar to the original galvanization shade.
  • Contains pure zinc.
  • Quick drying, very resting for application in aerosol.
  • Suitable for painting small areas.
  • Don’t need air pressure for splashing.
  • Spray-able in a thin, uniform layer.
  • Does not require coating in hot zinc for small areas.
  • Prevents the development of rust of the expected area, provides cathode protection.
  • Ready to repetite on the same day and even within a few minutes in summer.
  • High coverage area – economical.

Uses:

  • To repair galvanization of damaged areas for a cold galvanization of small areas.
  • Welding coatings in galvanized constructions for continuation and galvanization sequence.
  • Suitable for galvanization in steel constructions, railings, bars, fences in damaged galvanization areas and welding areas and gypsies around the welding area.

Technical data:

  • theoretical coverage – 1 liter per 10 square meters on a smooth surface.
  • Flexibility – 1 mm (sheen)
  • recommended layer thickness – 100 microns wet.
  • Recommended number of layers – 2 (in case spraying the first layer does not observe the completeness of the entirety of the area)
  • % zinc in dry film – 92% weight.
  • % solids in film volume – 95% zinc
  • quality level – 98% pure.
  • Flash point – – 42 degrees Celsius.
  • Boiling point – 24 degrees Celsius.
  • Heat resistant – up to 100 °C .

Spray Zincoat Silvery

Cold galvanization spray

Contains:

  • Acrylic resins.
  • Pure zinc 98%.
  • Silver pigments.
  • Solvents, additives.

Hue:

  • Gray -light silver.

Gloss:

  • Matt/Silk.

Drying to the touch:

  • 5 minutes.

Drying between layers:

  • 1 hour.
  • Final: 3 hours.

Application methods:

  • aerosol.

Preparation of surface:

  • thorough cleaning dust, fat, dirt and loose color.

Spray Zincoat Silvery

Cold galvanization spray

Basic color:

  • The product itself is fundamental.

Packaging:

  • 400 ml.

Storage:

  • In a cool, shady place at room temperature.

Shelf life:

  • 12 months in the original packaging.

Safety:

  • Not edible, out of reach of children.
  • Flammable, away from heats, fire and sparks.
  • Contains buthane gas and propane
  • make sure to proper ventilation while applying.
  • Wear goggles, solid gloves, protective clothing.
  • In case of injury , seek medical attention immediately.

warning:

  • Do not mix with unsalted ingredients.
  • Do not puncture the container, do not throw it into fire, empty the container of gas before dumping it.
  • Avoid contact with the skin and eyes, causing dryness and irritation of the skin.
  • In contact, rinse with plenty of running water and seek medical attention.

Spray Zincoat Silvery

Cold galvanization spray

Quality review:

  • In our factory laboratories in accordance with specifications.
  • ISO 9001-2015

User’s Attention: This technical specification is for general non-binding information only. The product is a professional product for professionals only who have already acquired previous experience in its implementation. This specification does not serve as a substitute for advice/training by an authorized consultant/guide. It is mandatory to apply to a small area for match testing first before applying large areas. The content of this specification changes over time and updates are entered, and updated versions must be requested. Names of consultants/professional instructors can be obtained by telephone. Read product MSDS safety instructions before starting work with it. Manufactured by Denver Colors & Coatings Israel Ltd., 80100 Sderot, 80100, certified by the Standards Institution of Israel in accordance with ISO 9001-2015 standards

Spray Zincoat Silvery

Cold galvanization spray