Spray Light Emitting In the dark

Spray Light Emitting In the dark

Glow at night paint

SPRAY LIGHT EMITTING PHOSFLUORESCENT ACRYLIC PAINT- FAST DRYING, DISCHARGEBLE GLOW AT DARKNESS. Acrylic spray emits light , for painting on walls, shelter doors, etc., warning signage and guidance in case of lights out, painting escape routes in the dark in case of emergency. This paint is loaded in light and in the darkness the paint emits the loaded light. The paint is used as emergency lighting and marking walking paths in the dark, marking the power outages, marking around windows and doors for identification in the dark.

Spray Light Emitting In the dark. www.denber-paints.co.il

Spray Light Emitting In the dark. www.denber-paints.co.il

Spray Light Emitting In the dark

Glow at night paint

Features:

  • Paint emits light in the dark.
  • When the lights off, a greenish yellow light glow from the paint.
  • Can be used as a top layer to any white primer.
  • Pure acrylic, but the pigment is sensitive to direct sun, so suitable for internal use only.
  • When exposed to sunlight, hue resistance is limited and acrylic lacquer “Denel clear” should be coated for protection.
  • Excellent adhesion capacity for infrastructure.
  • High coverage capacity.
  • Quick drying, ready to paint in an extra layer every 20 minutes depending on the temperature around it.
  • Easy to apply in aerosol spraying.

Uses:

  • Mark around doors and receiver windows.
  • Marking walking stripes for escape in the dark in public places, planes, underground buildings, movie theaters and theaters, shelters and shelters, etc.
  • Signage and direction of traffic at night in case of power outage or dark areas.

Technical data:

  • Theoretical coverage capacity – 1 liter to 5-6 square meters. (against a white background)
  • Flexibility – 2 mm (sheen)
  • Density – 1.3-1.45 gm\cm3
  • Viscosity – 2.5-3.5 Pa.sec (HAAKE)
  • Stiffness – 3 Dg (Ericsson)
  • Recommended number of layers – 2
  • Recommended layer thickness – 80-120 microns.
  • % Solids in volume – 20%
  • Abrasion – 120 microns – 350 cycles (Gardner) ASTM
  • UV resistance – 3-6 months

Spray Light Emitting In the dark

Glow at night paint

Contains:

  • resins.
  • Light-emitting pigments.
  • Special flex materials.
  • Wetting and leveling materials.
  • UV resistance enhancers.
  • Thixotropic additives and others.

Hue:

  • Greenish yellow.

Gloss:

  • Matt.

Drying to the touch:

  • 10 minutes.

Drying between layers:

  • 20 minutes. Final: 2 hours.

Application methods:

  • spraying.
  • Do not apply on rainy days on outdoor walls.

Preparation of space:

  • Thorough cleaning dust, fat, dirt and loose color.

Spray Light Emitting In the dark

Glow at night paint

Primer paint:

  • For an external and internal wall – Denbertex Primer.

Packaging:

  • 0.4 liters.

Storage:

  • In a cool, shady place at room temperature.
  • Keep lids tightly closed.

Shelf life:

  • 12 months in the original packaging.

Tool Cleaning:

  • Thinner 18-D.

Safety:

  • Not edible, out of reach of children.
  • Flammable – away from heats and sparks.
  • Ensure proper ventilation during application.
  • Wear goggles, gloves, protective clothing.
  • In case of injury , seek medical attention immediately.

Spray Light Emitting In the dark

Glow at night paint

Warning:

  • Do not apply at temperatures lower than 5+ °C.
  • Do not paint walls outside damp, wet, and on rainy days.
  • Do not mix with unsalted ingredients.
  • Avoid contact with the skin and eyes, causing dryness and irritation of the skin.
  • In contact, rinse with plenty of running water and seek medical attention.
  • Pressure tank – empty the container before it is thrown, do not throw into the fire – the risk of exploding.

Quality review:

  • In our factory laboratories in accordance with specifications.
  • ISO 9001-2015

User’s Attention: This technical specification is for general non-binding information only. The product is a professional product for professionals only who have already acquired previous experience in its implementation. This specification does not serve as a substitute for advice/training by an authorized consultant/guide. It is mandatory to apply to a small area for match testing first before applying large areas. The content of this specification changes over time and updates are entered, and updated versions must be requested. Names of consultants/professional instructors can be obtained by telephone. Read product MSDS safety instructions before starting work with it. Manufactured by Denver Colors & Coatings Israel Ltd., 80100 Sderot, 80100, certified by the Standards Institution of Israel in accordance with ISO 9001-2015 standards

Spray Light Emitting In the dark

Glow at night paint