Spray Al Shemen Engine oil remover

Spray Al Shemen Engine oil remover

Al Shemen emulsifier 

Professional oil and grease remover emulsifier 

Professional industrial oil remover, for removing all sorts of oils and greases in industry. After dissolve the oil become milky in contact with water (creates emulsion) and washes easily. A unique mix of solvents and emulsifiers which together serves as a strong oil dissolver can be washed with water, enabling dissolving oils and other lubricants in industry, which after melting can be washed off with water. AL SHEMEN N is full fill with a soap product materials and surfactants, thoroughly cleans all types of lubricants and lubrication industrial products.                        

Spray Al Shemen Engine oil remover www.denber-paints.co.il

Spray Al Shemen Engine oil remover www.denber-paints.co.il

Al Shemen emulsifier

Properties:

  • Quality degreaser ready for use with no mixing or dilution.
  • Attacks the oil and / or grease thoroughly and melts it or absorbed and breaks it. Unites with the oil and become emulsion when contacts with water and wash out easily as soap.
  • Makes the oils and / or grease to become washable materials like soap, when the water touch the emulsion it become white milky and washes with the oil..
  • Cleaning the area perfectly without leaving oily residue or grease.
  • Easy to apply in any way.
  • Can be used as a material that clean systems regularly and gently, can be washed off with water all the time and at any time..

Applications:

  • Cleaning machines in the industry by spreading and washing in water.
  • Cleaning vehicles motors by spraying the Al Shemen N on them and wash with water pressure.
  • For military weapons systems for oil and grease removing like in Tanks bearings and chains while and before changing to new grease and oils.
  • For cleaning greasy floors in garages and industry. By spreading on the floor and sand with broom and then wash with water.

Al Shemen emulsifier

Technical data:

  • Theoretical surface coverage- 1 liter/4 m 2 .for daily oils quantity that spread from industrial machines or on truck motor.
  • Layer thickness: 250 mic.
  • Recommended layers number- 1 for full coat..
  • Viscosity – 13 sec. #4
  • Density- 8-1.0 gr/cm3.

Instructions for use:

  • Cleaning metals: deep or spread Al Shemen N and after few minutes wash with
  • Car engines cleaning: spray on all the engine parts and wash with high pressure water.
  • Floors cleaning in garages and in industry: spread the Al Shemen N on the floor sand it well with a street broom. Than wash with water.

Content:

  • Solvents.
  • Soaping materials and surfactants.
  • Emulsifiers.
  • Wetting agents.

Al Shemen emulsifier

Tint:

  • Transparent yellowish.

Ventilation:

  • In closed places – forced ventilation must be used.
  • While spraying the material – a proper mask must be used with a solvent filter.

Implementing Method:

  • Brush, Roller, spray, airless.

Dilution:

  • No dilution aloud. Ready for use.

Surface preparation:

  • Removal of big massive oils and grease.

Al Shemen emulsifier

Packing:

  • 5 liters, 18 , 200 liters,

Storage:

  • Store in well shaded place, room temp with proper ventilation.
  • Keep lids tightly closed.

 Shelf life:  

  • 12 months in original

Tools Cleaning:

  • water

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Al Shemen emulsifier

Safety precautions:

  • Inedible, keep away from the reach of children.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint with the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S

Quality Review:

  • In our factory laboratories in accordance with ISO 9001-2015 specifications

Please note: This technical specification is for general non-binding information only. The product is a professional product for professionals only who have already acquired previous experience in its implementation. This specification does not serve as a substitute for advice/training by an authorized consultant/guide. It is mandatory to apply to a small area for match testing first before applying large areas. The content of this specification changes over time and updates are entered, and updated versions must be requested. Names of consultants/professional instructors can be obtained by telephone. Read product MSDS safety instructions before starting work with it. Manufactured by Denver Colors & Coatings Israel Ltd., 80100 Sderot, 80100, certified by the Standards Institution of Israel in accordance with ISO 9001-2015 standards

Spray Al Shemen Engine oil remover

Al Shemen emulsifier