Denbertex Super in colours wall coat

Denbertex Super in colours wall coat

Flate flexible exterior wall coat

Denbertex Super in colors flate wall coat. Non-textured protective high build coating, exterior flexible solvent walls coat. Flexible, smooth, thick, solvent coating is especially for exterior walls for ocean and extreme environmental endurance that lasts for many years. Durable and applicable at extreme temperatures. Seals out salts and conceals over minute cracks. Has a 13 year warranty. Decorative and smooth coat. Durable for more than 25 years on exterior walls.

Denbertex Super in colours wall coat. www.denber-paints.co.il

Denbertex Super in colours wall coat. www.denber-paints.co.il

Properties:

  • Seals perfectly and prevents rain and moisture penetration.
  • Breathes and allows moister vapors to evaporate from the inside outside.
  • Endures UV rays.
  • The polymer has 70 year lasting erosion endurance.
  • Flexible and conceals over minute cracks.
  • Applicable at low temperatures from -20°C.
  • Durable in extreme conditions at temperatures from -60°C up to +60°C.
  • Durable in acid rain and moge.
  • Washable and repels dust and dirt.
  • Smooth and decorative, in colors.
  • Doesn’t rot, mold and fungus do not grow on it.

Denbertex Super in colours wall coat

Flate flexible exterior wall coat

Applications:

  • For exterior coating to seal buildings for many years.
  • For exterior surface beautification.
  • To solve erosion problems in salted areas.
  • To renew old and cracked buildings.
  • And To solve endurance problems where water based paints have failed.
  • To spray on external rough walls for sealing and renewing.

Technical specifications:

  • Theoretical coverage area: 10 square meters per liter.
  • Actual required coverage area: 2-3 square meter per kg.
  • Density: 1 .2-1.36 gm/cm3
  • Flexibility: l mm (Sheen)
  • Viscosity: 30,000 CPS (Brookfield)
  • Hardness: > 3 Dg (Erichsen)
  • Erosion: 1 20 microns 1 520 cycle (BYK Gardener) ASTM
  • Recommended coat thickness: 1 mm (wet), 2 layers are recommended.
  • Number of grams of water vapors passing per for 24 hours and 1 mm mercury pressure: 1.O
  • Adhesion ability: 146 Newton per square centimeter.

Contains:

  • Special acrylic styrene.
  • Fillers, pigments.
  • Flexibility substances.
  • Solvents,additives.

Colors:

  • Is any from catalog Denbercryl or other.

Denbertex Super in colours wall coat

Flate flexible exterior wall coat

Gloss:

  • Matte silk ,

Touch-dry time:

  • 30-60 minutes.

Drying time period between layers application:

  • 8-24 hours.Final: 24 hours.

Application methods:

  • Spraying- spray with an upper container for orange effect.
  • Spraying with airless for flat coat.
  • Brush, roller, spray.

Dilution:

  • 0%-5% mineral turpentine or D-32

Surface preparations:

  • Clean the surface from dirt.

Primer layer:

  • Denbertex Primer is required.
  • See technical specifications and surface preparations for this product.

Denbertex Super in colours wall coat

Flate flexible exterior wall coat

Packaging:

  • 18 liters.

Storage:

  • In a shaded and cool place at room temperature with appropriate ventilation.
  • Keep lid sealed.

Shelf life span:

  • 12 months in its original package.

Equipment cleansing:

  • Use mineral turpentine or D-32 thinner after use.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Denbertex Super in colours wall coat

Flate flexible exterior wall coat