Denbertex Super Сlear lacquer for construction protection

Denbertex Super Сlear lacquer for construction protection

Transparent wall protective coat

Denbertex Clear

Clear penetration primer, deep humidity wall isolation or top coat. Clear liquid based on clear acrylic copolymer styrene that has a small molecular structure that enables deep penetration into the wall. Contains a silicone sponge that works deep into the surface without changing the surfaces natural look. Penetrates deep into the infrastructure sealing and strengthen it. Creates a clear primer layer that seals and breathes that enables to continue painting if required. Also could be used as an isolating top coat paint that protects and preserves buildings.

Denbertex Super Сlear lacquer for construction protection. www.denber-paints.co.il

Denbertex Super Сlear lacquer for construction protection. www.denber-paints.co.il

Properties:

  • Penetrates deep into the infrastructure and strengths it.
  • Seals and enables breathing.
  • Prevents rain penetration.
  • Clear and doesn’t changes the surfaces natural shade.
  • Prevents old walls from continuous deterioration.
  • Enables painting with Denbertex super/texture.
  • When used as an isolating top coat it seals, protects and strengthens old buildings.
  • Protects all types of infrastructure from the weather without changing the surface look.

Denbertex Super Сlear lacquer for construction protection

Transparent wall protective coat

Applications:

  • Excellent seal for building exterior walls.
  • Protects antique and historical buildings.
  • Protects stone statues and monuments.
  • Coats roof tiles.
  • Coats golden, silver and other types of domes.

Technical specifications:

  • Theoretical coverage area: 8 per liter for smooth surfaces.
  • Surface requirements:
Type of surface Cover area per liter (sq meters) No. of layers recuired
Chalk stone 2-3 2-3
Plaster 4-5 1-2
Cement 5-7 1
Spray rough 4-6 1-2
Jerusalem stone 5-7 1
Silicone stone 3-4 1-2
Sulfate wall 4-5 1
Roof  tops terracotta 6-7 1
Gravel 3-2 1-2
  • Flexibility: 1 mm (Sheen)
  • Density: 0.95 gm/cm3
  • Viscosity: 30-40 cPs (Brookfield)
  • Rigidity: 3 Dg (Erichsen)
  • Adhesion ability: 146 Newton per square meter.
  • Recommended coat thickness: about 200 microns (wet).

Denbertex Super Сlear lacquer for construction protection

Transparent wall protective coat

Contains:

  • Acrylic silicone copolymer styrene resin.
  • Solvents, additives.

Colors:

  • Clear

Gloss:

  • Silk

Touch-dryness:

  • 2 hr.

Drying time period between layer applications:

  • 6 hour. Final: 24 hours.

Application methods:

  • Spray, roll and brush.
  • It is recommended spraying until a 200 micron wet layer is formed.
  • For highly absorbent surfaces see Surface requirements.

Dilution:

  • No dilution needed, spray at low pressures 3-4 to prevent deterioration.

Denbertex Super Сlear lacquer for construction protection

Transparent wall protective coat

Surface preparations:

  • Clean the wall with 150 water pressure.
  • Dry and repair.
  • Spray about 200 microns of Denbertex Clear per layer.
  • Spray a number of layers until completely covering the surface according to the Surface requirement chart.

Packaging:

  • 5 liters or 18 liters.

Storage:

  • In a shaded and cool place at room temperature with appropriate ventilation.
  • Keep lid tightly sealed.

Shelf life span:

  • 12 months in its original package.

Equipment cleansing:

  • Use mineral turpentine immediately after use.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Denbertex Super Сlear lacquer for construction protection

Transparent wall protective coat

Safety precautions:

  • Inedible, keep away from the reach of children.
  • Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S

Denbertex Super Сlear lacquer for construction protection

Transparent wall protective coat