Denbertex granulated colors 1-4 mm. Denber paints and coatings

Denbertex granulated colors 1-4 mm

Protective-decorative, textured paint for outdoor

Exterior high build coat based on excellent styrene acrylic solvent. Comes in various colors and textures. Quartz stone or perlite in sizes 1-4mm and other various flakes to choose from to put inside the clear basis. The coating seals the surface from humidity and moist and a thick coat with quartz or perlite is noise resistant and isolates.

Denbertex granulated colors 1-4 mm. www.denber-paints.co.il

Denbertex granulated colors 1-4 mm

Protective-decorative, textured paint for outdoor

Properties:

Has excellent adhesion to Denbertex primer.
Perfectly seals humidity penetration.
Allows the walls to breath.
Flexible and binds cracks and pores.
Conceals uneven and rough infrastructure.
Comes in various colors and textures or marble.
Suitable for coating in areas near salty sea water environment.
Washable and cleanses easily.
After it rains it gives a renewed look.
Endures smog and acid rain.
Endures UV rays.
Applicable at low temperatures from -20°C.
Doesn’t rot – mold and fungus do not grow on it.

Applications:

For high quality exterior coating for buildings.
For renewing and sealing decoratively.
And For humid areas and beaches.
For coating asbestos roofs.
For decorative coating with natural marble flakes.

Denbertex granulated colors 1-4 mm

Protective-decorative, textured paint for outdoor

Technical specifications:

Coverage area:

quartz 1: 1-1.5 Kg/m2

quartz 2: 1.5-2.5 Kg/m2

and quartz 3: 2-3.5 Kg/m2

perlite 2 : 0.8-1.5 Kg/m2

perlite 3 : 1.25-2 Kg/m2

and perlite 4 : 2-3 Kg/m2

Flexibility: 1 mm (SHEEN)
Percentage of solidities: 79.5%
Viscosity: 30,000 cPs (Brookfield)
Density: 1-1.7 gm/cm3
Recommended coat width: 1-1.5mm for small aggregate and up to 5mm for perlite
Number of grams of water vapors passing per for 24 hours and l mm mercury pressure: 1.0
Adhesion ability: 146 Newton per square centimeter.

Denbertex granulated colors 1-4 mm

Protective-decorative, textured paint for outdoor

Contains:

Special acrylic copolymer styrene.
Flexibility substances.
Melamine, pigments, aggregates.
Solvents, additives.

Colors:

White, colors according the Denbertex catalog or 1000 colors catalog.

Gloss:

Shiny or silk , also available with marble flakes.

Touch-dry time:

30-60 minutes.

Drying time period between layers application:

8-24 hours. Final: 24 hours.

Denbertex granulated colors 1-4 mm

Protective-decorative, textured paint for outdoor

Application methods:

Spraying- spray with an upper container.
Nozzle: 1-4 mm in according to the size of the aggregates.

Dilution:

0%-5% mineral turpentine or D-32 thinner.

Surface preparations:

Clean the surface from dust.

Primer layer:

Denbertex Primer is required.
See technical specifications and surface preparations for this product.

Packaging:

18 liter.

Denbertex granulated colors 1-4 mm

Protective-decorative, textured paint for outdoor

Storage:

In a shaded and cool place at room temperature with appropriate ventilation.

Shelf life span:

12 months in its original package.

Equipment cleansing:

Use mineral turpentine or D-32 thinner after use.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Safety precautions:

Inedible, keep away from the reach of children.
Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

Denbertex granulated colors 1-4 mm