Denberschpachtel acrylic flexible putty

Denberschpachtel acrylic flexible putty

Denber natural/transparent acrylic flexible putty for exterior walls.

Acrylic putty – transparent for exterior walls

DENBERSCHPACHTEL ACRYLIC FLEXIBLE CLEAR – all purpose,  ready-mixed joint compound for exterior walls surface preparation  before painting and filling cracks, holes and etc

A flexible, easy-to-apply and easy-to-rub acrylic filler putty for external walls, which gives the wall a smooth and delicate appearance as required before starting painting. Fills cracks and small holes and fills and smoothes the wall. Gives the wall a beautiful and delicate decorative look. Extremely strong and durable in outdoor conditions even in direct exposure. Suitable for repairing cracked kraft and filling voids.

Denberschpachtel acrylic flexible putty www.denber-paints.co.il

Denberschpachtel acrylic flexible putty www.denber-paints.co.il

Characteristics:

  • Ready to use.
  • quick drying.
  • Adheres well to the wall, fills and seals cracks, grooves, gaps and small holes and depressions.
  • For external use only to beautify and smooth the wall before painting.
  • Rubs off easily.
  • leaves a smooth surface.
  • Adheres excellently to plaster, plasterboard, concrete, etc.
  • Excellent adhesion to primary colors such as Danbarol and Danbartex primer.
  • Easy to apply with putty and grout
  • Excess can be easily cleaned with water during application.
  • To be applied in several thin layers until completely filled. Each layer should dry completely before another layer.

Uses:

  • For exterior walls in preparation for paint.
  • For filling cracks, grooves and depressions in exterior walls.
  • For smoothing and getting a perfect finish before paint
  • For filling and smoothing prefabricated wall joints, concrete elements, rough exterior plaster, bricks, blocks, etc.
  • For repairs of a cracked natural stone.
  • For filling gaps with cladding tiles of all kinds.

Acrylic putty – transparent for exterior walls

Technical data:

  • Average viscosity – 70,000cPs (Brookfield)
  • Flexibility – 6 mm (SHEEN)
  • Stiffness – 1 Dg (Ericsson)
  • Recommended layer thickness – 1 mm
  • Recommended number of layers – as required layers until full.
  • Density – 1.6 g/cm3

Containing:

  • Flexible acrylic emulsion.
  • Melanes – quartz.
  • Smoothing materials
  • Wetting agents.
  • additives.
  • Preservatives.

 Color:

  • Clear

Gloss:

  • Matt.

Touch drying :

  • 30-60 minutes. (depending on the thickness of the layer and the ambient heat)

Drying between layers:

  • 2-3 hours. Final: 3-4 hours

Denber natural/transparent acrylic flexible putty for exterior walls

Acrylic putty – transparent for exterior walls

Application methods:

  • Applying – with putty or gel and smoothing with sponge gel.
  • Cleaning – with a sponge dipped in water when the material is fresh
  • Polishing – with glass paper until a completely smooth surface is obtained
  • Filling gaps – with a rubber spatula

Dilution:

  • without dilution.

Area preparation:

  • Thorough cleaning of dust, grease, dirt,
  • Widen capillary cracks with a width and depth of 3-8 mm

Primary color:

  • If the Dunbartex plaster does not stick to the wall due to grease or a crumbling wall, rub with glass paper and paint with a binding agent – Denbertex Primer .

Packing:

  • 2.5 liters, 5 liters, 18 liters.

Storage:

  • In a cool and shady place at room temperature with adequate ventilation.
  • Not resistant to freezing except for export model.
  • Make sure the lid is tightly closed.
  • Be sure to cover the material with nylon in its packaging to prevent liquid evaporation and drying out.

Shelf Life:

  • 12 months in the original packaging.

This technical specification is for  non-binding general information  only

To the old site: http://www.denber-paints.co.il

For the full specification:  Denber natural/transparent acrylic flexible putty