Retarder delay drying time prevent over spray

Retarder delay drying time prevent over spray

Over spray preventing

Additive retarder of control drying time for Denbergloss Direct Gloss, Acryl car and Denberdiuke paints allowing painting large areas without OVER SPRAY causes of too fast drying time and the paints vapor falls like dry sand on the surface.

Retarder delay drying time prevent over spray. www.denber-paints.co.il

Retarder delay drying time prevent over spray. www.denber-paints.co.il

Retarder delay drying time prevent over spray

Over spray preventing

Properties

  • Delay drying time of paints prevent over spray.
  • Improves final film look.
  • Increase final gloss of the paint.
  • Allow to paint very large surfaces without dry vapor of paint in the air.

Applications

  • For painting cars & vehicles.
  • For painting agriculture machinery.
  • and For painting engineering equipment.
  • For painting big elements like trucks and their back box etc.

Technical data:

  • Viscosity – 13 sec #4
  • Density – 0.9-1.0 gm/cm3

Contains:

  • Retarder

Color :

  • Clear

Retarder delay drying time prevent over spray

Over spray preventing

Application  methods:

  • To add to the mixture of paint with the hardener and thinner about 10% before start painting.

Packaging:

  • 1 liter, 5 liters, 18 liters.

Storage:

  • In a shaded and cool place at room temperature with proper ventilation.
  • Keep lid tightly closed.

Shelf life:

  • 24 months in its original

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Retarder delay drying time prevent over spray

Over spray preventing

Safety precautions:

  • Inedible, keep away from the reach of children.
  • Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S

Retarder delay drying time prevent over spray

Over spray preventing

Warnings:

  • Don’t mix the product with materials which were not recommended by us.
  • Don’t apply if the temperature is under +7°C.
  • Don’t apply if humidity is over 80%
  • When applying with Airless, do not aim it at anybody a direct hit could be fatal at pressures over 150 atm.
  • Read thoroughly the technical data of the product listed in this section; confirm that everything is understood completely, for clarification contacts our tech. department.
  • All information that is listed in this content is a recommendation merely and cannot be applied in the court of law.
  • The costumer must test & check that this product is compatible with his equipment and needs.
  • The information listed in this section is according to the laboratory conditions (temperature, humidity etc.) which the products were tested.
  • The recommendations listed do not hold any responsibility for this product.
  • Theoretical and actual coverage area are different concepts, the actual coverage is affected by the required thickness of the layers, required number of layers, painting conditions including the amount of paint which spread in the air before touching the surface.
  • The information listed in this section is based on experience and accumulating data, Denber inc., has the right to change the information listed at any time.
  • Paints that have been in stagnation or exposed to air more than needed could have their qualities changed.

Retarder delay drying time prevent over spray

Over spray preventing