Denbergloss antistatic in colors

Denbergloss antistatic in colors

CONDUCTIVE POLYURETHANE PAINT IN SHAEDS

Denbergloss antistatic in colors. www.denber-paints.co.il

Denbergloss antistatic in colors. www.denber-paints.co.il

DENBERGLOSS ANTISTATIC is a high conductivity polyurethane paint, in many shades, suitable for floors conduction resistance 300-900 ohms. Or 10*6-10*8 ohm (1 M ohm – 100 M ohm)

Two-component paint thinner diluted 11 unique polyurethane-based electrical conductivity, high abrasion resistant and UV resistant.

Quality paint electrically conductive, abrasion resistant, exceptionally strong and durable interior and exterior condition, also topping Antistatic floors, a unique molecular structure. Low electrical resistance (hundreds of ohms) and very high electrical conductivity. Suitable for coating electronic equipment, electrical cabinets, plastic stands, power cords, floors and more. Mainly solves shielding problems and grounding and creates static electricity transmission disturbing grounded to the soil.

Denbergloss antistatic in colors

CONDUCTIVE POLYURETHANE PAINT IN SHAEDS

Properties:

  • Excellent adherence to plastic, PVC, and most infrastructures.
  • Resistant to outdoor conditions.
  • Selection of decorative shades.
  • UV resistant.
  • High flexibility paint.
  • High hardness and resistance to scratches including floors for carts and pedestrians.
  • Low electrical resistance, high conductivity for abnormal electrical currents, high and low.
  • Two-component, for professional use.
  • Meeting high breakdown currents such as lightning and electrical current intensity differences.
  • The minimum layer thickness of 60 microns is required for high quality transmission of 300-900 ohms.

Applications:

  • Indoor and outdoor painting of electronic packaging and plastic enclosures of all kinds of electronic equipment.
  • For grounding sensitive electronic equipment.
  • For grounding lightning or high power voltage breaks.
  • Power cable and RF cables shielding.
  • Painting antistatic floors and walls.
  • Marking in monitoring and electronic monitoring to run commands and other medical equipment leveling of liquids and etc..
  • Operating level sensors in plastic containers / nylon / polypropylene.
  • Upper coating anti-static tiles and walls, and all the electronic equipment necessary shielding and grounding.

Denbergloss antistatic in colors

CONDUCTIVE POLYURETHANE PAINT IN SHAEDS

 Technical data:

  • Theoretical coverage – 1 liter to 10 square meter (100 microns wet layer).
  • Flexibility – 1 mm (sheen).
  • Density – 1.65-1.68 gm \ cm3.
  • Viscosity – 2-3 Pa.sec (HAAKE).
  • Hardness – 10 Dg (Erichsen).
  • Recommended layer thickness – 60-120 microns wet.
  • Amount of conductive materials: 45-55%.
  • Amount of solids – 75%.
  • Adhesion – B5 (ASTM D 3359-78).
  • Temperature range: -30°C to +85°C.
  • Resistance – a strip of 10 cm wide and 1 cm thick 100 micron dry – 300-900 Ohms.
  • The number of layers is recommended 1- 2 (when high resistance it is required to apply another layer, apply three layers for further improvement in transmission).

Contains:

  • Polyurethane resin polyol.
  • Fillers, electricity transmission components.
  • Special flex materials.
  • Additives.

Shades:

  • Every shade of gray, black and blue shades, green, brown, red / brown, and more …

Denbergloss antistatic in colors

CONDUCTIVE POLYURETHANE PAINT IN SHAEDS

Shine:

  • Silk.

Drying:

  • For Contact – 1-2 hours, Final – 24 hours.

Methods of Application:

  • Brushing, Rolling, spraying.

Dilution:

  • Thinner D11.

Surface preparation:

  • Thorough cleaning dust, grease, dirt, loose paint.
  • You can sand/polish the surface with a cloth moistened with alcohol or thinner to ensure a clean and dry surface.
  • Sand with sandpaper to remove grains and discolored paint and aspirate with air pressure.

Primer:

  • Usually not necessary, if no color adhesion to infrastructure consult factory for appropriate primer or surface preparation.

Denbergloss antistatic in colors

CONDUCTIVE POLYURETHANE PAINT IN SHAEDS

Packaging:

  • 0.5 kg, 1 kg, 4 kg.

Storage:

  • In cool and shaded place at room temperature with appropriate ventilation.
  • Keep lids hermetically sealed.

Shelf life:

  • 12 months in original packaging.

Tools cleaning:

  • Thinner D-11 immediately after painting.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Denbergloss antistatic in colors

CONDUCTIVE POLYURETHANE PAINT IN SHAEDS

Denbergloss antistatic in colors. www.denber-paints.co.il